Looking for samsung bn44-00287 Power Board

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • TomLeogrande
    New Member
    • Dec 2020
    • 7
    • United States
    #1

    Looking for samsung bn44-00287 Power Board

    Anyone have any hidden places that might sell one of these?

    I have a Samsung LN52B750U1FXZA - anything else that might be used instead of this board (since I can't find one)??

    I can't find one online.

    You can see my issue here https://www.badcaps.net/forum/showth...t=56560&page=2 If you have any other ideas I am all ears!



    Thanks for any help!!
    Last edited by TomLeogrande; 12-03-2020, 03:00 PM.
    Tags: None
    • tvtimmy
      Badcaps Legend
      • Mar 2015
      • 1160
      • usa
      #2
      Re: Looking for samsung bn44-00287 Power Board

      You can use BN44-00267A or BN44-00267B . They are available on Ebay, but pricey.

        Comment

        • TomLeogrande
          New Member
          • Dec 2020
          • 7
          • United States
          #3
          Re: Looking for samsung bn44-00287 Power Board

          Fantastic information! Thank you!

            Comment

            • TomLeogrande
              New Member
              • Dec 2020
              • 7
              • United States
              #4
              Re: Looking for samsung bn44-00287 Power Board

              TVtimmy - One quick question.

              Will either of the BN44-00267A or BN44-00267B boards be useable as is? Or will they need modifications to work as a replacement for the original?

              Thank you again for the help!

                Comment

                • tvtimmy
                  Badcaps Legend
                  • Mar 2015
                  • 1160
                  • usa
                  #5
                  Re: Looking for samsung bn44-00287 Power Board

                  No modification needed, plug and play.

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • Tynan Dill
                      Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                      by Tynan Dill
                      I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                      Upon bringing it home and plugging it up, it showed a standby light.

                      I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                      The screen seems to blackout and stay black, but with a flashlight I can see the display.

                      With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                      Assuming...
                      ORIGINAL POWER SUPPLY BOARD
                      7 Photos
                      11-22-2024, 01:46 PM
                    • Cooperr
                      Samsung 59" plasma PN59D550C1F seeking advice on mystery power board issue
                      by Cooperr
                      I picked up this TV from Facebook Marketplace, original owner described it as "screen went black after a pop" and I hoped to see an obvious fuse or cap to replace. Doesn't seem to be the case, but my experience and electrical knowledge are kind of limited for this.

                      The power board (BN44-00445A, see attached) turns on and Vs and Va seem to momentarily have power, then they steadily drain to zero over a minute or two as if they're only getting power from capacitors. I've been measuring Vs and Va from the test pads, with and without the other boards connected to the power board...
                      10-21-2025, 01:11 PM
                    • C152Heavy
                      Samsung LN46C630K1F – Intermittent Backlight, BN44-00341B Power Board
                      by C152Heavy
                      Samsung LN46C630K1F – Intermittent Backlight, BN44-00341B Power Board

                      Summary for TL-DR readers:
                      • Backlight is intermittent, may come on with TV boot or not. No flickering, never fails during TV on.
                      • Have obtained Samsung schematic & service documents - Can upload if helpful.
                      • Have read ALL applicable threads
                      • C1818 and CP820 replaced as low hanging fruit
                      • CN802 data taken for normal and failed BL operation. SUMMARY: Pin 2 - 5vDet = 3.52 @normal, 0.0 @BL fail. Pin 6 - EPWM = 1.631 @normal, 1.058 @BL fail.
                      • VCC pin (18) of PFC...
                      01-11-2023, 02:53 PM
                    • Destroyer-Br
                      [HELP] Acer AN515-55 (LA-J871P Rev: 1B) – Board won't power on after GPU investigation – Suspecting Super I/O or PCH
                      by Destroyer-Br
                      [HELP] Acer AN515-55 (LA-J871P Rev: 1B) – Board won't power on after GPU investigation – Suspecting Super I/O or PCH

                      Hi everyone,

                      I'm working on an Acer Nitro 5 unit with the following specs:
                      • Motherboard: LA-J871P Rev: 1B
                      • Model: Acer AN515-55-59MT
                      • S/N: NHQ7JAL00403906A973400
                      • SNID: 03902728734
                      Initial Issue


                      The laptop initially presented graphic issues and driver failure (Code 43) for the GPU.

                      After preventive maintenance (cleaning, thermal paste, etc.), it powered on normally. We disassembled it again to inspect the GPU, reassembled...
                      04-17-2025, 08:18 PM
                    • Nicktronic
                      Samsung Power Supply Board BN44-00874F
                      by Nicktronic
                      Hey everyone,

                      This power supply board is hard to find but there are repair kits available. This board had a blown fuse, FP801S, blown PFC MOSFET, QP802CS and ceramic cap, CP809. I replaced them with parts I already had and tested the rest of the parts that would've come in the repair kit and they were fine. I powered the board up on the bench expecting, in typical Samsung power supply board fashion, to see all my output voltages but, nothing. 0 volts on CNL801, CNM801 and CNT801. The only thing I have is 170vdc on the filter caps. No standby voltage either.

                      Anybody...
                      03-17-2025, 06:20 AM
                    • Loading...
                    • No more items.
                    Working...