Announcement

Collapse
No announcement yet.

Toshiba 49U5863DB Vestel 17MB130S, blank screen, no image, sound ok.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #21
    Re: Toshiba 49U5863DB Vestel 17MB130S, blank screen, no image, sound ok.

    OK, now I see how the two legs of that device is connected, at first look at your earlier picture it looks like it has one end connected to ground plane, but now I see how legs are connected, it is an Inductor.
    Do you get any DCV reading at all on that inductor?
    Never stop learning
    Basic LCD TV and Monitor troubleshooting guides.
    http://www.badcaps.net/forum/showthr...956#post305956

    Voltage Regulator (LDO) testing:
    http://www.badcaps.net/forum/showthr...999#post300999

    Inverter testing using old CFL:
    http://www.badcaps.net/forum/showthr...er+testing+cfl

    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
    http://s807.photobucket.com/user/budm/library/

    TV Factory reset codes listing:
    http://www.badcaps.net/forum/showthread.php?t=24809

    Comment


      #22
      Re: Toshiba 49U5863DB Vestel 17MB130S, blank screen, no image, sound ok.

      Hi.
      if I can, I would advise you to raise all the smd as indicated in the photos, obviously paying close attention.
      carefully check, raised at least on one side, the indicated capacitors, in particular the indicated transiator, it is certainly short-circuited.
      in case it was the transistor I will give you the solution in private messages.
      finally the 10mf 50v capacity is the right one
      Attached Files

      Comment


        #23
        Re: Toshiba 49U5863DB Vestel 17MB130S, blank screen, no image, sound ok.

        has there been any progress in this repair?

        Comment

        Working...
        X