Zenon ZN-AHD-5016 DVR software

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Öğretmen27
    Member
    • Oct 2019
    • 36
    • TÜRKİYE

    #1

    Zenon ZN-AHD-5016 DVR software

    Zenon ZN-AHD-5016 software is needed. 25L12835F used. Fault: The device is stuck in the text zenon. There are all voltages.
    Attached Files
    Last edited by Öğretmen27; 10-31-2020, 06:28 AM.
  • Öğretmen27
    Member
    • Oct 2019
    • 36
    • TÜRKİYE

    #2
    Re: Zenon ZN-AHD-5016 DVR software

    Mainboard: GM8210-AHD-16CH

    Comment

    • dick_barton
      Badcaps Legend
      • Aug 2015
      • 6642
      • Wales

      #3
      Re: Zenon ZN-AHD-5016 DVR software

      Can you freeze the IC and see if it works. If it does can you then freeze it and copy the contents to a new EEPROM
      Willing to help but I'm no expert.

      Comment

      • Öğretmen27
        Member
        • Oct 2019
        • 36
        • TÜRKİYE

        #4
        Re: Zenon ZN-AHD-5016 DVR software

        I did not understand anything you said

        Comment

        Related Topics

        Collapse

        • stormanimal83
          Gigabyte B450 Aorus Pro stuck at VGA LED, burning hot LED Controller MCU 1 under PCI slot...
          by stormanimal83
          Hey....

          Board as written in description was stuck at VGA LED. common Problem wit these type of bords.... tried all the "standard stuff" like resettin... reseatin.... found out the LED Controller MCU1 = IT8295FN-56A geting burning hot under the last PCI Slot.. now i desoldered it cause there were only 18 ohms at the caps arround.... another aorus x470 in working condition with similar part and nearly same layout had arround 280 ohms...

          my question is: why doesnt the board start know without this chip.... worked myself through the boardview but i can´t understand...
          01-18-2024, 02:15 PM
        • SMDFlea
          Copy DMI info easily with Hex editing software and Macro script
          by SMDFlea
          Copying DMI information from an old bios to a new one is difficult for some members, often they have no experience with a hex editor,or some that have tried find it too hard.There is an option to make things easier for those members so that they don`t need to post their own bios backup for the DMI copying.

          Experienced bios modding members can help by posting in other threads the DMI offsets,macro script generated by the software and a download link to the software at softpedia mentioned in this guide,or post your macros in the comments here with a link to the bios request thread ....
          02-28-2023, 02:14 PM
        • NeedsPractice
          Backup To OneDrive Software? Everything! Best Software?
          by NeedsPractice
          I contacted Microsoft and they said they do not have software to where you could backup all your files to one drive. I mean you can copy some of your files to your one drive folder and back stuff up. However, it does not do this automatically.

          I have around (10) hard drives I want to backup to the cloud with One Drive. What is the best software to do this with?

          AOMEI Backupper
          I Drive
          Easeus

          I do not want a Cloud Plan. I just need the software to take my DATA and Transfer it to the cloud in a nice, readable, viewable fashion. I wish...
          02-04-2022, 06:04 PM
        • ekozeko333
          [Help] Lenovo Yoga Slim 7-14ARE05 (DA0LS3MBAF0) – 25Q80DVN1G Flash Is All FF, USB-C PD Stuck at 5V
          by ekozeko333
          Hi all,
          I’m trying to recover a Lenovo Yoga Slim 7-14ARE05 with board DA0LS3MBAF0 Rev:F. I’ve run into an unusual issue where USB-C PD is stuck at 4.7–5V and the system won’t boot (keyboard lights flash briefly, then nothing).
          🔥 The Problem Started After Suspected ESD/PD Fault
          I experienced a power issue or ESD event through a USB-C charger
          After that, the NX20P5090 power switch was visibly burned and was replaced
          Now the PD controller always negotiates 5V @ 2A, even with known-good chargers
          🧠 What I’ve Done So Far
          Flashed...
          06-21-2025, 02:48 AM
        • BMCappelletti
          iMac fan ramps up after shutting down. Software? SMC? FET?
          by BMCappelletti
          Hi everyone.
          There are some topics here (also on a lot of other places) regarding this issue, but I believe none has a definitive answer. At least I didn't see anyone saying it really worked for them.
          In my case I have an iMac A1418 (late 2012) that the fan goes full blast (or at least ramps up the speed) after going to sleep or turning the computer off.
          It's not a software issue, cause it was formatted and it happens with any MacOS version I test.
          At some places people say it would be an issue with the S5 rail. Others say it's the S0 rail. And some others say it's an SMC...
          01-17-2025, 08:11 AM
        • Loading...
        • No more items.
        Working...