Samsung UE40D8000YS Strange Issue

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • trunks81
    Badcaps Veteran
    • May 2020
    • 265
    • Nederland

    #1

    Samsung UE40D8000YS Strange Issue

    Hello

    Ive got this tv and its showing me some strange issue!
    When connecting the tv to AC there is no standby led also no voltage present on powersupply, Fuses they check out good.
    When i disconnect the cable to the mainboard the backlight goes on and there are voltages present on the powersupply.
    Also the fuse on the mainboard check out oke.
    When i follow the flowchart frist component to check out is IC203 but i cant find any datasheet on it.
    Also when powerboard is connected and i check the voltages on those parts there are zero.
    So something is drawing the powerboard down?
    Attached Files
    Last edited by trunks81; 09-19-2020, 09:32 AM.
  • diif
    Badcaps Legend
    • Feb 2014
    • 6978
    • England

    #2
    Re: Samsung UE40D8000YS Strange Issue

    Page 4.4, only after tests the power supply work are tests on the mainboard done.

    Comment

    • trunks81
      Badcaps Veteran
      • May 2020
      • 265
      • Nederland

      #3
      Re: Samsung UE40D8000YS Strange Issue

      When connecting ac the relay does not click.
      Of i remove CN201 the relay clicks and BL goes on

      Comment

      • diif
        Badcaps Legend
        • Feb 2014
        • 6978
        • England

        #4
        Re: Samsung UE40D8000YS Strange Issue

        5V on pin 4 of CN201 ?

        Comment

        • trunks81
          Badcaps Veteran
          • May 2020
          • 265
          • Nederland

          #5
          Re: Samsung UE40D8000YS Strange Issue

          Tested the board without an 1K present, and the Mainboard not connected.

          PIN 1 = B5V Present
          PIN 4 = A5V Present
          PIN 7 = B18VS Present
          PIN 11 = B13V Present

          Also IC203 measure 1,5ohm between to legs, So i think this one is defective,
          Only probleem i need to have the datasheet so i can check what the function is and wat the pinout is

          Comment

          Related Topics

          Collapse

          • Document Archive
            Samsung Galaxy Book 2 Notebook Specification for Upgrade or Repair
            by Document Archive
            This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
            09-07-2024, 05:50 AM
          • alltvrepairs
            Samsung HG49EE690 Hospitality TV reboot issue Mainboard BN94-11086A
            by alltvrepairs
            Hi,

            I have 3 of these TVs for repair with same problem of going to standby after around 10minutes and start again continuously. I have tried a new SPI 25Q40 but fault remains. Am suspecting a CPU problem as it gets a bit hotter than I expect.
            This seems to be a common problem in these models. I am 100% sure it is a mainboard issue as I have fitted a spare from a normal TV from a UE40K5607 and stays on (diplay inverted but I managed to rotate in SM using a different display).


            Any help appreciated!...
            03-14-2024, 03:39 AM
          • vincentedel
            Samsung SyncMaster 740n Phase Control Issue
            by vincentedel
            Hello,
            I'm having an issue with the Samsung 740n's phase control setting. When I use the automatic adjustment, it sets the value to around 54 (with a range of 0-100), and the picture looks clear and sharp. However, after some timeβ€”like after playing a gameβ€”the text starts to look blurry. When I auto-adjust again, it may increase the value to 80, and everything becomes sharp once more. Yet, after a while, whether it's a few hours or a day later, the same blurriness returns, and I have to adjust it again.

            I'm using the Samsung 740n monitor drivers instead of the default plug-and-play...
            04-22-2025, 12:33 AM
          • Manucsl
            QE65Q800TATXXC Samsung TV Issue
            by Manucsl
            Hello.

            My TV is a QE65Q800TATXXC Samsung TV.

            Issue : When you plug the 220V, voltages are OK on the power board and you can hear the click from the relay, but TV is not starting when power button is pressed. Red led is blinking when you press power button. But no images or sound ( Back-light is off )
            Then if you disconnect the cable from the main board to the power supply, the TV back-light turns on.
            Any ideas to check would be very appreciated 😊

            After reading some posts on this forum, I suspect an eeprom issue so I bought a CH341A to dump...
            02-19-2025, 07:47 AM
          • FourRunner
            Display issue Samsung TV UA65JS9000W
            by FourRunner
            I purchased a used Samsung TV model UA65JS9000W recently knowing it had an issue with the screen. When switched on the picture was bright both sides of the screen but a little darker in the middle of the screen. Thinking this was the back lights (side mounted LCD strips) I replaced these, however the issue is still there. I am now thinking it may be a TCOM issue, but am not sure, any advice on this would be appreciated. Also whilst changing out the back lights I noticed the the thick clear plastic sheet (maybe 1.5 to 2mm thick) below the diffusers there is cracking (up to 75mm) on the sides and...
            10-03-2024, 07:05 PM
          • Loading...
          • No more items.
          Working...