Re: Vizio E701A3 No picture
Post #1:
But I checked standby power and it shows 3.3volts so I know thats good. So I decided to check the remaining pins and it all looks good except for the main board. So I am getting 12v in pin 1 on one of the ribbon cables going to the TCON board but nothing on the second ribbon cable on pin 1.
Looking at this picture: https://www.badcaps.net/forum/attach...8&d=1597284325
LVDS connector CN4002 pin 1 and pin 2 are connected to ground plane.
Pin 38, 39, 40, 41 (connected to filter cap C4001) look to be for supplying power to the LEFT connector of the T-CON.
Please clarify.
Post #1:
But I checked standby power and it shows 3.3volts so I know thats good. So I decided to check the remaining pins and it all looks good except for the main board. So I am getting 12v in pin 1 on one of the ribbon cables going to the TCON board but nothing on the second ribbon cable on pin 1.
Looking at this picture: https://www.badcaps.net/forum/attach...8&d=1597284325
LVDS connector CN4002 pin 1 and pin 2 are connected to ground plane.
Pin 38, 39, 40, 41 (connected to filter cap C4001) look to be for supplying power to the LEFT connector of the T-CON.
Please clarify.
Comment