Return of the BadCaps

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Hamie
    Badcaps Legend
    • Apr 2014
    • 1383
    • UK

    #1

    Return of the BadCaps

    Anyone else noticing higher volumes creeping back into a lot of budget brand tvs.

    Those MEGMEET powersupplies are particularly prone.
    assuming, of course, the LEDs dont go first.
  • saddle_au
    Waste Warrior
    • Jan 2013
    • 121
    • Australia

    #2
    Re: Return of the BadCaps

    Got a Megmeet in my hand right now. Off a 48 inch cheapie. 4 out of 6 caps popped.

    Comment

    Related Topics

    Collapse

    • Sus256
      HISENSE 65E7KQ PRO - no boot
      by Sus256
      Hi all!

      HISENSE 65E7KQ PRO
      RSAG7.820.13512 - chassis
      MT9618BAATAB - cpu
      RSAG7.820.12059 - power
      HD650Y3U77 - panel
      KLM8G1GETF - emmc

      The TV does not turn on, the standby indicator is on. All voltages are present.
      Emms is dead. Not readable, not detected.
      Replaced emmc.
      But with another dump there is no launch

      Terminal log

      UART
      <
      AC_ON
      RPMB key is not yet programmed

      HASH1_VERSION=0x00000000 64bit
      E-B
      FDE enabled
      layout pattern onebin by SAR7,0...
      06-01-2025, 02:11 AM
    • howardc64
      A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
      by howardc64
      Problem

      This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
      08-04-2024, 10:36 PM
    • DeanWy
      WD Sentinel DS5100 (NAS) boot issues
      by DeanWy
      Hi all,

      I have a Western Digital Sentinel DS5100 NAS system which has stopped working. It has dual BIOS. I bought the system second hand with an already broken primary BIOS (it rebooted multiple times until second BIOS was used).

      It worked until recently. The system was idle in Windows Server 2012 and a BSOD occurred, I think it was 'critical process died'. Thereafter it didn't boot, it just sat there with no video output and fan speed at 100% (there's a proprietary Windows driver by WD which controls the fan, outside of that it always runs at 100%).

      There...
      07-30-2024, 04:13 AM
    • neilc6
      Sold Sharp LC-50LB370U Board on Ebay - Return Requested
      by neilc6
      Sold this board on ebay with this warning in the description and pic of working TV.

      "Pulled from a TV with a damaged panel. NO REFUNDS.
      This model suffers from LED backlight failures. Make sure your backlights are working before replacing boards. Symptom is TV turns on and off with no backlight or a flash of backlights."

      Ebay Return Request
      Reason for return - Doesn't work or defective
      Details - Powersupply board has sound,but verry dark screen.I would like to return,You send for me another one. Thank You.

      With ebay, if...
      07-16-2021, 04:00 PM
    • Artem2009-16
      Sincere thanks to the BadCaps community for your help 🙏
      by Artem2009-16
      Dear BadCaps community,




      I would like to sincerely thank everyone here for your help and support.

      Thanks to the files and clear instructions shared on this forum, I successfully updated the BIOS of my Intel DQ965GF (Guardfish) motherboard to version 6100.




      Everything went smoothly, and the system is now working perfectly.

      This update meant a lot to me — I’ve been learning about BIOS flashing for quite some time, and your guidance finally made it possible.




      I truly appreciate...
      10-30-2025, 12:44 AM
    • Loading...
    • No more items.
    Working...