Teac ledv32u83 tv loops on and off with logo only

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • andy smethurst
    Member
    • Feb 2010
    • 49
    • Australia
    #1

    Teac ledv32u83 tv loops on and off with logo only

    Hi I have this tv and another that when turned on,will power up to the logo for 30 seconds, then turn off for 1 second continuasly, and can only be turned off at the power switch.
    Are these repairable or junk now?
    I have repaired many power and main board problems
    but this may be out of my league, which is unfortunate as I'm seeing more of this kind of problem.

    Thanks and regards :Andy.
    Tags: None
    • diif
      Badcaps Legend
      • Feb 2014
      • 6978
      • England
      #2
      Re: Teac ledv32u83 tv loops on and off with logo only

      It sounds like an eeprom issue, it needs removing and reprogramming.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Verlengsnoer
          Bios splash/logo change
          by Verlengsnoer
          Hi all,

          at firs, i hope this is the right place to post my question.

          Im looking for a tool to change the bios logo.

          everyone knows when you turn on your laptop/pc you will see the manufacturer logo like lenovo, hp, dell...

          i know that HP has a build in option to change the splash logo.

          but i want to change the manufacturer logo to an own logo.

          I try'd Change Logo 5.0, but when i make a backup of an laptop and edit the logo and flash the editted version back on the laptop the logo diddnt change.
          ...
          10-28-2022, 09:52 AM
        • Echoo
          Fujitsu D757 sff desktop pc bios logo reset
          by Echoo
          Fujitsu D757 sff desktop pc with company logo and it doesn't work to restore the factory logo with UefiModL tool. I need to restore many of these machines to the factory Fujitsu boot logo! Does anyone know a solution?
          11-25-2024, 01:54 AM
        • smarty
          Can anyone identify PCB logo?
          by smarty
          Can anyone identify logo shown below?
          The logo I showed can be found on the PCB's of laptops NP530U3B, NP530U3C, NP540U3B, NP540U3C, etc.

          I assume this is a logo of one of the PCB's manufacturers, but I'm not sure.
          Neither ChatGPT nor Copilot know the correct answer.
          TIA
          1 Photo
          09-10-2024, 11:48 PM
        • q2v5
          Lenovo T480s, what's up with this Bios, modded boot logo, reflashed now bricked
          by q2v5
          Lenovo T480s
          Model 20L8-S3TE00
          Board ET481-U10
          Chip MX25L12873F

          Hi, I have a few of these & they came with a custom bios boot logo, no passwords etc.

          2 x were brand new unused but with custom boot logo, 1 I installed Windows/ran updates then it bricked itself. 1 wouldn't get past the custom bios boot logo.

          The third I loaded windows, took a backup of the bios chip, then tried to flash several different clean bios's via programmer which all caused it to not boot. I tried to reflash the original bios both using clip & desoldering but...
          08-15-2024, 10:40 PM
        • p.puhakka
          Fujitsu Esprimo K557/24 allinone desktop, boot logo
          by p.puhakka
          Hello forum!

          I have received a lot of help here, regarding bios modding. Very thankful!

          Now I have a lot of Fujitsu K557 desktops, and those have custom bios logo/custom splash screen, and I need to change them to the original Fujitsu logo.

          I am looking for the easiest way, because I have about 40pcs of them, and I think there is some "official" way to do this.

          I have tried a lot of Fujitsu tools, which can inject the logo to the bios file, but no luck.

          Any suggestions? Thanks!
          06-06-2024, 11:24 AM
        • Loading...
        • No more items.
        Working...