Samsung UE55NU8770 TV Blink Error Codes

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • loadedboyuk
    Member
    • Feb 2014
    • 26
    • uk
    #1

    Samsung UE55NU8770 TV Blink Error Codes

    Hi everyone

    I have TV Samsung UE55NU8770 Full Smart 4K

    No Pic No Sound, No power up.

    When I plug it in I Get a code flashing out on the stand by LED

    1 Long / 3 Short

    I can not find any service manuals or anything for this TV, and I have never seen a code on the newer models so I'm a little confused.

    Before I get the back off I was hoping someone might have a clue to what is potentially the problem
    Tags: None
    • nomoresonys
      Badcaps Legend
      • Jan 2013
      • 12206
      • U.S.
      #2
      Re: Samsung UE55NU8770 TV Blink Error Codes

      Remove the cable going from powerboard to mainboard and inspect it for damage, such as burn marks or discoloration.
      Quit because THIS SITE LETS A ROGUE MEMBER TYPE ANY GARBAGE HE PLEASES AND THE POWERS THAT BE NEVER DO ANYTHING ABOUT IT SO HE NEVER QUITS. THEN YOU GET A PENALTY FOR RESPONDING TO HIS ATTACKS. BEEN GOING ON FOR WAY TOO LONG. DONE SUPPORTING A SITE THAT ALLOWS THIS BS.

        Comment

        • loadedboyuk
          Member
          • Feb 2014
          • 26
          • uk
          #3
          Re: Samsung UE55NU8770 TV Blink Error Codes

          Completely understand your message but Idealy I will to do as much as I can without opening the TV first, software resets, software fault finding. it might not be everones way to doing things, thats just how I like to start

            Comment

            • nomoresonys
              Badcaps Legend
              • Jan 2013
              • 12206
              • U.S.
              #4
              Re: Samsung UE55NU8770 TV Blink Error Codes

              "No Pic No Sound, No power up" Doubtful you will get anything like that done with no display, good luck tho.
              Quit because THIS SITE LETS A ROGUE MEMBER TYPE ANY GARBAGE HE PLEASES AND THE POWERS THAT BE NEVER DO ANYTHING ABOUT IT SO HE NEVER QUITS. THEN YOU GET A PENALTY FOR RESPONDING TO HIS ATTACKS. BEEN GOING ON FOR WAY TOO LONG. DONE SUPPORTING A SITE THAT ALLOWS THIS BS.

                Comment

                Previous template Next

                Related Topics

                Collapse
                • howardc64
                  Samsung QN75Q6FNA backlight no display, red LED blink 2x, fault in panel
                  by howardc64
                  • Prior owner tried a replacement main board. No difference.
                  • Samsung 2x red blinking standby LED = panel fault
                  • Jumpered FB_TRDY_1 (pin 1 CN1300 left. main tcon->left side buffer boards) and FB_TRDY_3 (pin 95 CN1301 right. main tcon->right side buffer boards) This allows testing individual T-Con (on main board) connection to panel on this Samsung. Found fault on left side (viewing from rear of TV)
                  • Each side has 2 buffer boards, disconnected left side flex between 2 buffer boards. Fault is on the left most board.
                  • Tape masking eventually isolated to CN1300 pin 15 (CKV4_GOA) Display
                  ...
                  07-19-2025, 10:54 PM
                • michalk3777@gmail.com
                  Sharp Hisense - LC-65N7004U Error codes
                  by michalk3777@gmail.com
                  Hello, looking for a list of error codes for this TV. made in 2020, its manufactured by Hisense under Sharp brand. No clicks, black screen, no sound, power light is on solid. When I press power, it blinks 5 normal blinks and 1 short. and nothing happens.
                  Anybody has a list of error codes that might apply to this TV? I have not opened it yet.
                  Regards,...
                  12-15-2024, 09:20 PM
                • peterwang
                  Samsung NP750QGK-KG3US BIOS program error seeking help
                  by peterwang
                  Samsung NP750QGK-KG3US BIOS program error seeking help

                  PCB:BA41-03025A BA92-25486B

                  I opened the Modular Flash Image Tool-v16.50.00.1120 software and encountered the following error message. I am seeking help.


                  ...
                  Yesterday, 08:15 PM
                • pixelcap
                  Pioneer Kuro Pro 111FD 8 red blink error
                  by pixelcap
                  Pioneer Kuro Pro 111FD 8 blink red LED.





                  I have been trying to solve the power-down 8-blink red LED problem with my Pioneer.


                  So far I have replaced the power supply board, and the digital assembly board, I have reconnected the ribbons to all boards, ensuring the connections are good. Even though the problem is the 8 red light error and not the more common 8 blue light error code, I had Kcrownie,
                  based in North Carolina replace the chips that cause the 8 blue LED problem (the main board and audio board) the plasma is still powering...
                  1 Photo
                  10-06-2024, 11:26 PM
                • Sus256
                  HISENSE 65E7KQ PRO - no boot
                  by Sus256
                  Hi all!

                  HISENSE 65E7KQ PRO
                  RSAG7.820.13512 - chassis
                  MT9618BAATAB - cpu
                  RSAG7.820.12059 - power
                  HD650Y3U77 - panel
                  KLM8G1GETF - emmc

                  The TV does not turn on, the standby indicator is on. All voltages are present.
                  Emms is dead. Not readable, not detected.
                  Replaced emmc.
                  But with another dump there is no launch

                  Terminal log

                  UART
                  <
                  AC_ON
                  RPMB key is not yet programmed

                  HASH1_VERSION=0x00000000 64bit
                  E-B
                  FDE enabled
                  layout pattern onebin by SAR7,0...
                  06-01-2025, 02:11 AM
                • Loading...
                • No more items.
                Working...