Epson projector H-331B image problem

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • NConstantinou
    Badcaps Veteran
    • May 2017
    • 326
    • Cyprus
    #1

    Epson projector H-331B image problem

    I have the above projector which was shown light picture and I opened in for service.
    After cleaning from dust all filters and mirrors the projector displays double Image.
    Image can't be adjusted by settings.
    There are no alignment screws to adjust.
    I replaced lens housing with the 3 colours housing and works ok.
    On colour lenses there are 2 screws on each colour filter which have been removed and placed back. There is no way that filters are misaligned because the 2 screws are in such a way that there is no space to move in any direction.

    Can anyone HELP!
    Thanks
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • narf
      Epson EB-U42 projector / Caps with 0.7 ohms ?!
      by narf
      hi all,

      first of all: i'm a (motivated) newbie, so please forgive me any stupid question i may or may not ask

      i'm currently repairing a projector: Epson EB-U42 that doesn't start (no lights, nothing).

      what i've found so far:
      - the PSU does its job and supplies 12V to the mainboard via the connector.
      - shortly thereafter, there is a mosfet (TS420-600B) where i can test 12V on the one side (in the data sheet this side is called Anode), Gate 0V, Kathode shorted to ground
      - not far away, there's the first cap with a resistance of 0.7 ohms....
      07-02-2024, 03:53 PM
    • CdDvdFlash
      Epson EMP TW700 Projector Image Adjustment Help
      by CdDvdFlash
      I have an Epson EMP TW700 projector and the top left and bottom left side of the image is going towards the centre left, there is a setting/button to adjust the top left and right and another button to adjust the bottom left and right sides but there is no setting to adjust top/bottom left. If I use either of the buttons to adjust the top or bottom it is still out of being plumb. When I disassembled this projector to fix a different problem I must of made things out of alignment but I dont know which thing or screw to adjust.

      The picture below is an over exaggerated example but...
      07-25-2020, 05:17 AM
    • Document Archive
      HP Elite Slice G2 + Image Load & Asset Tag Elite Slice i5-7500T Specification for Upgrade or Repair
      by Document Archive
      This specification for the HP Elite Slice G2 + Image Load & Asset Tag can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Elite Slice G2 + Image Load & Asset Tag boardview and Elite Slice G2 + Image Load & Asset Tag schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please...
      09-12-2024, 02:20 PM
    • platinumsteel
      Epson VS250 Projector Lamp Not Working.
      by platinumsteel
      Hi guys gooday i have a Epson VS250 Projector that turns on and is also being recognized and detected by the computer when i plug the hdmi cable.The only issue the projector lamp is not working .Are these lamps repairable ? Or i should just forget repairing the lamp and just buy a replacement. Thanks...
      04-09-2023, 04:03 PM
    • Kiks412
      BENQ MP511 Video Projector - No Button Responce and wierd Image
      by Kiks412
      Hey guys, I have this Video Projector that turns on, takes a bit to give some image, and when it does it displays a weird static image, and has no reaction to on-device buttons or remote whatsoever, even to turn off, only unplugging from the outlet. I'm new to this kind of device so I will be very happy to get some help with this....
      12-20-2022, 10:00 AM
    • Loading...
    • No more items.
    Working...