Need UN40EH5000F Side Cover

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • neilc6
    Badcaps Legend
    • Nov 2015
    • 1550
    • Canada
    #1

    Need UN40EH5000F Side Cover

    Got this TV for free since it was completely disassembled. Powered up with backlight and no video which typically means bad tcon but I had a compatible tcon which didn't fix it. Got a new main board that fixed it. First replacement didn't turn on at all but seller gave me a full refund.

    So missing the side cover for the ports. If you are scrapping this model or UN40EH5300F let me know. Should have 3 openings for 2 hdmi and 1 usb.
    Attached Files
    Last edited by neilc6; 01-22-2020, 03:08 PM.
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • howardc64
      A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
      by howardc64
      Problem

      This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
      08-04-2024, 10:36 PM
    • howardc64
      Samsung UN55NU7300F Curved TV. Half side backlight out. Fixed by just removing the rear snap cover
      by howardc64
      TV was fixed just after removing Samsung's rear snap cover.

      This curved TV's construction is rather interesting. When the snapped on back is removed, rest of the TV will relax the curvature. Top of LCD panel is loose as it wants to straighten out against the slightly curved bezel. Snapped back provide most of the curvature shape. So just simple disassembly of rear cover will allow the rest of the TV frame to relax its curvature. Thats probably what fixed it but no idea which connection. 4x LEDs are edge lit.

      Maybe PSU->backlight connector didn't have a good contact?...
      07-23-2025, 12:34 AM
    • momaka
      HannStar Hanns-G HC194d LCD monitor repair
      by momaka
      Normally, I never post repairs this quick after I do them, because… I am usually very slow. But today, I’m making an exception here. Why? No idea. Perhaps only because the repair details are still “fresh” in my head… which is ironic, given this is a 16 year old monitor that hardly anyone will care about today. It is new to me, though. I picked it up last November from someone on my local Craigslist. It wasn’t very close to where I live, but was close to a family friend that I had to go visit anyways. So after watching the posting on Craigslist for a few weeks and seeing it getting...
      03-15-2023, 10:17 PM
    • flibidy
      Magnum IA.100 Amplifier Switches on, No Output, Possible Input Side fault?
      by flibidy
      I have here a Magnum IA.100 which belongs to my parents.



      The unit powers on & when the relay kicks in, you get a pop from the speakers (this might sound weird but is usual behavior for this amp). However, you get nothing coming through it from any of the inputs & no pops and crackls from any of the controls.


      Because of the sound from the speaker when the amp turns on I have assumed that the output section probably works but I could be wrong & I'm not sure how to test that side of things further.


      What Ive done........
      Magnum IA.100 Front
      8 Photos
      01-01-2025, 01:26 PM
    • bouny56
      Lenovo E15 Nm-c421 usb-c work only in one side
      by bouny56
      ​Hello

      Laptop E15 I5 10gen
      Mb nm-c421

      I have a problem with the usb-c power dc.
      The motherboard start only in one side of the usb-c

      Replace the usb-c port 2 times same problem

      With the usb-c meter, one side 20v ok, other side the usb-c meter don't come on

      Try to test the pin with the Mechanic Tail insertion tester and every pin are ok ?

      Can the pd controler be the fault ? Or something else maybe ?

      Thx

      ...
      02-11-2025, 03:15 AM
    • Loading...
    • No more items.
    Working...