lg 50pk350

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Nawual
    Senior Member
    • Jul 2016
    • 65
    • Spain
    #1

    lg 50pk350

    I have this TV that only shows me the red LED of the stanbye, when I press the remote control, the LED flashes and goes off completely. I have checked the PSU and I have all the tensions, both the standby and the VS, PON, etc.
    What step should I follow now to continue checking?

    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Thermaltake
      HP 450 G1 Boot ask F1 continue F10 bios
      by Thermaltake
      Hi, I got HP 450 G1 with boot problem always asking F1 continue F10 bios. I had bad battery on it and replace it with new one because it was giving me error 601. I was thinking that this F1 continue F10 BIOS has to do something with my bad battery, but when I replace it I was not having error 601 anymore but that message on boot with F1 continue F10 BIOS is still here. I tried to replace CMOS battery and reset bios, nothing. I tried to flash new BIOS but it already have latest one and I even tried to overwrite it, still same. Don't know what to do anymore. Does someone have any clue what this...
      01-13-2024, 09:12 AM
    • satinser
      LG 50PK350 Stuck in Standby not clicking
      by satinser
      Unusual because whilst it is stuck in standby not the usual clicking you normally have with this model. Red standby illumination with no response from remote or manual controls. if power turned off after around 7 seconds 1 single relay click. Power board is EAY60968801 which I believe is almost identical to the PSU used in LG 50PJ350 ( EAY60968701). The only difference is the EAY60968801 has the extra connector for the Xsus board whereas EAY60968701 hasnt because powered from Ysus in 50PJ350.
      With the 50PJ350 testing power supply is relatively easy because SMPS turns on automatically when...
      06-16-2019, 05:08 PM
    • mkdj
      MacBook Air A2337 (820-02016) - 5V, won't turn on - please help me understand why
      by mkdj
      Hello everyone,

      About me, my goal and the equipment I (don't) have:
      I am brand new to this forum, and I am eager to learn about repairing laptops. I have an engineer background although I haven't done electronics for a while. I have watched several Youtube videos in the last two months, trying to understand how to diagnose a faulty motherboard. I have a USB-C Amp meter and a classic multi meter. No DC Power Supply to inject voltage, no soldering iron to replace components.

      About my issue and my goal:
      A friend of mine has a MacBook Air M1 A2337 that does not...
      04-03-2025, 08:28 AM
    • awe126
      Macbook Pro 16" A2485, 820-02100, battery service recommended, fan full speed, doens't charge
      by awe126
      Hello all,

      I bought a Macbook Pro 16" M1 Pro, A2485, 820-02100, which working flawlessly but not charging. I thought battery needs to be replaced but then started reading and it seems that problem will be in motherboard.
      Battery sign has cross sign and MacOS can't read battery stats. Fans are full speed but can be set down via Fancontrol software.
      I did start digging into in and found out below:

      Diode mode:
      SMBUS_BATT_SCL: 0.529
      SMBUS_BATT_SDA: 0

      SMBUS_BATT_SCL: 1.795V
      SMBUS_BATT_SDA: 0.948V

      Can anyone help...
      03-27-2025, 12:23 PM
    • someonenotyou
      SY8003 instead of SY8003A
      by someonenotyou
      Hi.

      I have a Lenovo HLS1C_HLS1D LA-L502P board with bad SY8003A DC/DC converter.
      I have a different mother board witch contains SY8003 DC/DC converter.

      Can I use SY8003 instead of SY8003A converter?

      These are the differences -
      • Short Circuit Protection:
        • SY8003: Uses latch-off protection. This means that when a short circuit is detected, the device will shut down and remain off until it is manually reset.
        • SY8003A: Uses hiccup mode protection. In this mode, the device will repeatedly attempt to restart after a short circuit is detected. If the short
      ...
      03-05-2025, 07:54 AM
    • Loading...
    • No more items.
    Working...