Any source for ws-65905 projection tv parts?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • itelite
    Senior Member
    • Aug 2016
    • 124
    • USA

    #1

    Any source for ws-65905 projection tv parts?

    Working on a Mitsubishi ws-65905 with all kinds of problems. Convergence is off screen geometry is off, who knows what else.

    replaced convergence ICs to no avail. Was hoping to just purchase either a power supply or all internal boards and call it a day. To my surprise i cannot find any such things online.

    I would have thought since you cant give these things away someone would be breaking them down for parts.

    If anyone has a source, or a ws-65905 collecting dust in their shop let me know please

Related Topics

Collapse

  • Lvsitano
    Asus X532FL 3.2V at source and gate
    by Lvsitano
    I am having some trouble with troubleshooting a Asus X532FL rev 2.0 motherboard, which does not power on. So at the first MOSFET, I am getting 19V at the drain, and then 3.2V on both gate and source (compared with ground). Of course, the 2nd MOSFET's source will have 3.2v at source.

    First MOSFET is a QM3056M6 and 2nd MOSFET is a QM0930M3

    I already checked first MOSFET and source and gate are not shorted (drain with source not shorted either). Also I have 1.7V at the LDO rail (measured at the keyboard connector, as the power button is on the keyboard).

    First...
    06-26-2024, 02:13 PM
  • 2elw
    SVOD4 PCB pictures + parts
    by 2elw
    Hey, I find it very absurd that the SVOD4 costs so much and has zero documentation. I had no other choice than to buy it to unlock ECs, if there was any documentation or firmware avalible I could've made it or something simmilar. Anyways here are some of the most important parts:

    STM32H723VGT6 MCU - It's a microcontroller by STMicroelectronics and its the whole brain of the SVOD4. It has flash memory for the firmware which can be updated by the SVOD4 program. Its also powered by the AMS117 which converts 5v into 3.3V. 7€ on AliExpress.

    GW1N-UV9UG169C6/I5 FPGA - Its a...
    07-04-2025, 12:23 PM
  • SurrealMustard
    What parts can be salvaged from a plasma with a damaged display panel?
    by SurrealMustard
    I recently found myself the proud owner of a later-model Samsung plasma (the PN59D7000 for those keeping score at home) whose panel was, unfortunately, damaged in transport. I'm now preparing to part it out, but am curious as to whether or not any damage would have come to any of the components by attempting to power it up with the panel being broken. I read in one Avsforum thread (for whatever that's worth 😂) that the "scan driver boards" (by which I assume he means buffer boards) could be impacted by doing so. Is that actually the case? If so, since I don't intend on selling bad...
    03-09-2025, 08:29 PM
  • DynaxSC
    Asus Rog Strix B360-I Gaming - Parts Identification
    by DynaxSC
    Hi,

    I have an Asus Rog Strix B360-I Gaming with missing parts. I know there is a resistor missing for sure, but nearby it seems there might have been also a transistor or mosfet. Below the picture of the area on the board with the missing parts. The interesting area is inside the rectangle.




    I'd appeciate if somebody could make a detailled picture of this area from a working board and post it here. Getting the parts values would also be helpful. The revision of the board is 1.02 .

    Thanks in advance...
    08-23-2023, 07:56 AM
  • LarrySabo
    Samsung ProBook NP767XCM-K1CA battery connector replacment source?
    by LarrySabo
    Tonight I broke the battery connector on the motherboard of this laptop and need to source a replacement. See pictures. The marking seems to read B6u. The sticker on the motherboard reads TCZRFN6X00230 P03AJD BA92-20746B 06 29. If someone could suggest a proper part number and source, I would be very grateful....
    12-04-2024, 09:10 PM
  • Loading...
  • No more items.
Working...