Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]

Announcement

Collapse
No announcement yet.

User Profile

Collapse

Profile Sidebar

Collapse
Avatar
LarrySabo
Member
Last Activity: Yesterday, 02:41 PM
Joined: 05-03-2015
Location: Ottawa, Ontario
  •  
  • Filter
  • Time
  • Show
  • Source
Clear All
new posts

  • Unfortunately, I have 1.4 ohms to ground on the HWPG line at the ENE, so no point in installing the new IC. That's after cutting the PGood trace to the IC to ensure there is no short in that area. I think I'm at a dead end....
    See more | Go to post

    Leave a comment:


  • HP Omen DA0G3EMBCD0 G3EA Boardview doesn't seem to correspond with the layout of this board, even though it has the same part number. The area was badly burned but I thought there was a small component connected to the ground stub just above the capacitor. Perhaps that's just a test point and there really was no crispy component that came off when I cleaned up the area.

    I just received some TPS65295 ICs so I'll install one with nothing attached to the stub and see if it works. I need to mask off the exposed ground plane in that area before replacing the missing tracks (red). ...
    See more | Go to post

    Leave a comment:


  • Yes, I know, thanks. TPS65295 is a replacement and easier to find. Does anyone have details on the missing component and traces in the destroyed area of this circuit?...
    See more | Go to post

    Leave a comment:


  • A little late but it may help someone else. 51486 TI 081 AX5L.

    [URL=filedata/fetch?id=3259155&d=1713976630][ATTACH=JSON]{"alt":"Click image for larger version Name:\tBurnt IC.jpg Views:\t0 Size:\t544.0 KB ID:\t3259155","data-align":"none","data-attachmentid":"3259155","data-size":"thumb"}[/ATTACH][/URL]...
    See more | Go to post

    Leave a comment:


  • Re: IC suppliers in Canada or USA?



    Sam_sam_sam, I ended up ordering one from www-electronicloop-de on eBay. I've not had good luck with ICs ordered from China and suspect they are reconditioned pulls made to look new. Thanks for your reply, nevertheless....
    See more | Go to post

    Leave a comment:


  • IC suppliers in Canada or USA?

    I need a ENE KB9028Q-C IC but everything I find on eBay or Amazon has long delivery times. Can anyone suggest a trusted supplier in Canada (preferably) or the USA for small quantities of ICs?

    I usually buy from DigiKey but they don't list this IC.
    See more | Go to post

  • msecore Mini PC Fanless Computer schematic

    Any suggestions for where to find a schematic for [URL="https://www.amazon.com/dp/B0B8GW3Y35?tag=reviewmeta0b-20&pldnSite=1&th=1"]this[/URL] or a similar Mini PC? The MB marking is GWHL2 VER B.

    The one I had in for repair would shut down after 10-20 seconds and I believe the problem was a failing AC adapter. It had a 12v adapter but I mistakenly thought it was a 19v adapter so that's what I used for troubleshooting and it solved the problem, i.e., ran fine indefinitely. Customer (who probably thinks I'm an idiot) says I was lucky not to fry the thing and didn't...
    See more | Go to post
    Last edited by SMDFlea; 12-15-2022, 09:22 AM. Reason: schematic

  • Re: ASUS ChromeBook C434T not powering on

    Any luck? I have same model with same symptoms (charger LED unlit).
    See more | Go to post

    Leave a comment:


  • LarrySabo
    replied to Asus UX303U schematic
    Re: Asus UX303U schematic

    Thanks @mon2! My Av quarantines that but I'll try to make an exception. Any suggestions re. schematic?

    Edit: Works great -- thanks!
    See more | Go to post
    Last edited by LarrySabo; 03-13-2022, 09:50 AM.

    Leave a comment:


  • LarrySabo
    replied to Asus UX303U schematic
    Re: Asus UX303U schematic



    Hello PinGuy,

    Did you manage to find a schematic for this MB? I have been unable to find one. Couldn't open the boardview file either using the latest version of the Fritzing program; I'm getting the following error:



    I'll contact Fritzing tomorrow to pursue that but would appreciate any leads on a schematic if anyone has any.

    I stupidly neglected to disconnect the battery before disconnecting and reconnecting the LVDS cable so blew something. <Sigh>...
    See more | Go to post

    Leave a comment:


  • Re: New Members - please post your introductions here

    Greetings from Ottawa, Canada. I'm very pleased to find that badcaps includes so many interesting sub-forums. I'm wrestling with a Acer Aspire E1 laptop at the component level and came across a couple of potentially helpful threads. Attempting to download a V1 of the schematic (I have V0.2) prompted my registration.

    I'm a retired electrical engineer by training who has done very little engineering since graduating 50 years ago from the University of Waterloo. My career has mostly been in the computer industry one...
    See more | Go to post

    Leave a comment:

No activity results to display
Show More
Working...
X