Samsung plasma PN64F5500 Main problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • hmendez86
    Badcaps Veteran
    • Jun 2015
    • 344
    • united states

    #1

    Samsung plasma PN64F5500 Main problem

    I had a problem with power supply at first rectifier was burn and some transistos...so i decide to buy new power board an the green ligth on main wasnt getting power i npticed that the conection on cn1201 which is the remote ir sensor conector had a small transistor have been in a short was getting hot crazy so i did replace it from other boards from junk yard.....and it did work green ligth started but now the main goes on and off but no pic still....it goes on for like 5secs and off after that..
  • hmendez86
    Badcaps Veteran
    • Jun 2015
    • 344
    • united states

    #2
    Re: Samsung plasma PN64F5500 Main problem

    I have a working main board from other plasma pn60f5500 can this be fit to pn64f5500

    Comment

    • hmendez86
      Badcaps Veteran
      • Jun 2015
      • 344
      • united states

      #3
      Re: Samsung plasma PN64F5500 Main problem

      Attached Files

      Comment

      • hmendez86
        Badcaps Veteran
        • Jun 2015
        • 344
        • united states

        #4
        Re: Samsung plasma PN64F5500 Main problem



        Attached Files

        Comment

        Related Topics

        Collapse

        • Document Archive
          Samsung Galaxy Book 2 Notebook Specification for Upgrade or Repair
          by Document Archive
          This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
          09-07-2024, 05:50 AM
        • Asraf Atb
          Help Needed: Samsung UE55MU8000 Dead - Possible Main Board Issue
          by Asraf Atb
          Hi everyone,

          Im looking for some advice regarding my Samsung UE55MU8000 TV with main board model BN94-11606C. The TV suddenly stopped turning on and now shows no signs of life at all not even the standby light at the bottom.

          Initially, I suspected an issue with the PSU, so I took it to a repair center. They tested it and confirmed that the PSU works perfectly, even on other TVs. Based on that, I started investigating the main board.

          I disconnected the main board from the PSU, and the backlight turned on, which seems to confirm the main board is the issue....
          01-27-2025, 05:02 PM
        • bcstedt
          Samsung PN50C540G3FXZA 50" Plasma, power cycling, Y-Main problem, Canada
          by bcstedt
          Just starting to crack into this one and wanted to get the ball rolling.

          At power on (plug in), power light on, relays click, repeat (sometimes)

          After disconnecting Y-Main from SMPS power stays on and boot up jingle is heard from speakers

          Removed Y-Main for inspection and testing

          This pic from:
          PN50C540G3FXZA Fast Track Troubleshooting Manual - Rev 1/10/12
          ...
          12-15-2023, 10:30 AM
        • JSin21
          Compatibility of main boards between different variations of samsung MU6100
          by JSin21
          Hoping someone here could possibly help. I have a few questions in regards to compatibility with main boards. But I'll give a quick short run down on what's going on first;

          I have Samsung Smart TV UA65MU6100WXXY version DA01

          Now years ago it started intermittently playing up after a lighting strike. Lighting hit the block of units i was living in at the time. Ever since that night the TV started having a mind of its own, It would randomly turn itself off or on, and all inputs stopped responding like HDMI, aerial, but USB still worked. Anyway, over the next few months...
          11-27-2023, 04:54 AM
        • Biruslapio
          Samsung PL42C450 plasma X-Main IGBTs
          by Biruslapio
          Hello, the problem with this TV is it has all the Y and X voltages, but does not produce any image.

          It had a TON of cracked solder joints on these boards, fixed all that I could find, but in the last test I forgot to plug in the Y-SUS to control board flat cable, it was left dangling and possibly some pins shorted to the panel metal ground, the X-Main buzzed quietly then blew up in 3 seconds after powering up, annoying.

          Two RJH30E2 shorted, they are 360V 35A 1.7VCE IGBTs, the problem is I don't have any 360V IGBTs, only 300V or 600V, would two RJP3065 fit in? It's...
          04-08-2022, 01:16 PM
        • Loading...
        • No more items.
        Working...