Panasonic TH-P58v10M 6 blink after SC+SU+SD replaced

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Sgigi
    New Member
    • Aug 2019
    • 2
    • israel
    #1

    Panasonic TH-P58v10M 6 blink after SC+SU+SD replaced

    Hi All,


    3 weeks ago my T.V sounded a nice pop explosion and died, giving 7 blink code.

    looking in it, some transistors exploded on the SC board.

    ordered & installed replacement SC + SU + SD boards.

    turned on the t.v it came up for 30 seconds and turned off, giving the 6 blink code.

    disconnected the SS board and turned it on, t.v stays on, green led, black screen.

    does replacing SS board will do it ? or it can be the A board or P board as well?

    thank you in advance for any insight.
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Vebririon
      panasonic TX-P50V10E 6 blink led problem
      by Vebririon
      Hi everyone,

      I'm new here and trying to repair my Panasonic TX-P50V10E plasma TV, which is currently showing the 6 red blink error code.

      Just for context: I'm used to building PCs and installing modchips in old consoles, but this is my first time trying to fix a TV. I'm French, and while my English is okay, I'm using ChatGPT to help translate and clarify my messages as much as possible — so please forgive any odd phrasing.

      I'm also not very experienced with using a multimeter, but I'm very motivated and ready to follow instructions carefully and report...
      05-17-2025, 10:16 AM
    • signal.quest
      Panasonic LED TV TC-40A420U - Replaced Backlight LEDs but now no image/display or garbled
      by signal.quest
      I have a Panasonic LED TV TC-40A420U. The TV was given to me as an attempt to fix or throw out. I replaced the Backlight LEDs and now the screen lights up, but there is no image/display. If I play with the up/down buttons I can get the display to change from black to garbled. I can't get sound from HDMI but not sure of what input is selected. I have no remote control. When I connect a laptop to the HDMI ports it recognizes a Panasonic TV for display and sound output but I can't see or hear anything through the TV. This makes me think the mainboard is OK, but not sure if mainboard can...
      2 Photos
      03-17-2024, 10:14 AM
    • cloo
      Panasonic ZT60 plasma tv with strange behavior and 8 blink code
      by cloo
      I recently got my hands on a 60" Panasonic P60ZT60 plasma tv (european model) that has some strange issues along with an 8 blink code.
      It know this tv is getting old but it was once considered one of the best plasmas ever made, and i think it is still holds on to that even by todays standards.


      So, long story short. When i first got the tv it had a very bright washed out picture with very raised blacks in all picture modes and i couldn't find the cause in the picture setting menus.
      After doing a factory reset this problem was gone and the picture was back to...
      01-06-2025, 06:02 AM
    • SentraDude
      (Another) 7 BLINK TC-P60VT60 Panasonic - NEWBIE
      by SentraDude
      Greetings from SoCal I am new to this forum but not new to forum world. I come from Automotive end of side which is my main passion in life. Give the automotive nature, I love fixing and restoring things and I have in the past fixed many simple electronics, soldering, etc.. but this is a bit more involved so I found this forum, and I am very glad I did.

      I picked up a Panasonic TC-P60VT60 with the 7 BLINK error.
      Upon removing the back plate I found spider webs, dead spiders, and an amazing amount of dust. I did my best to clean the surface of the boards with a portable vacuum...
      04-04-2023, 04:24 PM
    • Userrrname
      Tx-pr42gt30 6 blink
      by Userrrname
      👋đŸģI recently got a tx-pr42gt30, I bought it in non-working condition. When I opened it, I saw that all the transistors and diodes had been removed from the tnpa5330, and several microcircuits were in poor condition, so I decided not to try to repair it. Instead, I bought another tnpa 5330 (also AB), which was already repaired (according to the seller, the board was repaired and worked before the screen was damaged), transistors were also changed on it, but Chinese copies were installed (there is no round hole in the middle, the inscription is easily erased) and a pair of transistors that...
      07-19-2025, 07:53 AM
    • Loading...
    • No more items.
    Working...