Hello All, , LG 37lf 65 -zc no video signal on av 1,2and 3, only component is working, i need help
-
-
Re: LG 37LF65 no video signal on Av1,2,3
Does it display a no signal message or just nothing at all on screen? -
Re: LG 37LF65 no video signal on Av1,2,3
The component input gives picture, but you know if you dont connect the RGB on component there will be no color, so component works fineComment
-
Re: LG 37LF65 no video signal on Av1,2,3
There is an IC in between the HDMI ports and main processor, I'd check that first and the circuitry around it.Comment
-
Re: LG 37LF65 no video signal on Av1,2,3
Did you try your device on a different tv?Comment
-
Re: LG 37LF65 no video signal on Av1,2,3
Here is the main board, please which of the IC you are talking about?Attached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
-
Re: LG 37LF65 no video signal on Av1,2,3
The one above the HDMI ports. You can see the traces going to it.Comment
-
Re: LG 37LF65 no video signal on Av1,2,3
What is AV 1, 2 and 3 ? Look at the ICs, identify them through data sheets then you will know their roles.Comment
-
Re: LG 37LF65 no video signal on Av1,2,3
It possibly could also be the capacitors https://www.ebay.co.uk/itm/LG-37LF66...item4d445fce55Comment
-
Re: LG 37LF65 no video signal on Av1,2,3
Looks like it's shared, are you plugging the yellow rca plug into the green and the red and white on the right side, not the middle red?Last edited by nomoresonys; 06-04-2019, 06:05 AM.Comment
-
Re: LG 37LF65 no video signal on Av1,2,3
Could try heating the chip with a heatgun, too much heat can kill it tho, if it starts working you know that chip is the problem.Last edited by nomoresonys; 06-04-2019, 06:53 AM.Comment
-
Re: LG 37LF65 no video signal on Av1,2,3
Hello friends, finally the fault is from the IC CXA2069Q, because i could not find the ic to replace, i just purchased a AV to VGA converter, did every connection inside the tv, most inportantly, i did not use the adopter that came with it, we all know is china and for duration sake, i did not use the 5v adopter that came with it, i took 5v to feed the converter so it will not be paminently on, i still used the AV3 as input to feed video and sound to tv. And everything work fine through ROB input. Thanks allComment
-
This specification for the HP EliteDesk 800 G3 + GoPro HERO6 Black 4K Ultra HD Video Camera can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the EliteDesk 800 G3 + GoPro HERO6 Black 4K Ultra HD Video Camera boardview and EliteDesk 800 G3 + GoPro HERO6 Black 4K Ultra HD Video Camera schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our...09-12-2024, 02:00 PM
-
Hi everyone, over the past few months i have taken a deep dive into motherboard diagnostics and I love the challenge. Currently im trying to learn all about the signals that travel around the motherboard, such as frequencies, enable signals High and Low logic states etc. And i have been learning to read and using the Schematics for this board that i requested here on Badcaps forum, from a few months ago, this is such a great place for these.
I’ve been working on a GA-970A-DS3 (rev. 1.0) that does not post. This motherboard has been my main learning board. I would like share...11-23-2023, 11:02 PM -
Hello everyone,
I'm turning to the Badcaps community to help me troubleshoot the radio Rx card from my (old) garage door opener. While I could just ditch that card and replace the whole system, I first would like to understand "why" it suddenly stopped working, because that's just how I am wired...!
Some basics: the receiver works on a 30.875 Mhz frequency. Yes, I'm aware this is not in use anymore in a looot of places. It does not use any rolling code, it's just a regular dip-switch code that you have to set up on both the receiver and transmitter. The receiver... -
This is from my son’s gaming computer that at first had minor overheating issues when playing a very intense game with it causing the computer to crash or reboot
Then bough a new motherboard and a new computer case that a cooling system in it already installed also brought the cooling system for this video card but now the issue with it is that it randomly rebooted screen goes blank randomly and suddenly video freezing or started with video being there then blank screen and then the video comes back or it just stays blank for a while and then maybe it will come back but it... -
This specification for the HP ProBook 450 G5 + GoPro HERO6 Black 4K Ultra HD Video Camera Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 450 G5 + GoPro HERO6 Black 4K Ultra HD Video Camera boardview and 450 G5 + GoPro HERO6 Black 4K Ultra HD Video Camera schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on...09-06-2024, 06:20 AM
Comment