Re: Vestel 17IPS20P pulsating
It was R242 that exploded and I erroneously replaced it with 10 Ohm. R311 is the one I checked to get the correct value since the two sub-circuits are basically the same configuration.
R370 and R228 are two 0,33 Ohm beefy resistors, the values reported are all wrong.
Also about half the components are missings on my board, these schematics are really odd.
It was R242 that exploded and I erroneously replaced it with 10 Ohm. R311 is the one I checked to get the correct value since the two sub-circuits are basically the same configuration.
R370 and R228 are two 0,33 Ohm beefy resistors, the values reported are all wrong.
Also about half the components are missings on my board, these schematics are really odd.
Comment