Sharp LC-60LE600U tries to turn on, faults, DIAGNOSTIC DONE BY THE NUMBERS!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • DXseekerMO
    Badcaps Legend
    • Feb 2018
    • 1119
    • US

    #21
    Re: Sharp LC-60LE600U tries to turn on, faults, DIAGNOSTIC DONE BY THE NUMBERS!

    Originally posted by jdTech
    What is the fault bypass procedure?

    Thanks!
    Depress the following keys on the button board simultaneously:

    Volume down, channel up and power.
    They call me......."threadkiller"

    Comment

    Related Topics

    Collapse

    • Document Archive
      Postcard 32 4-Bit 4-Digit Diagnostic Card PC Analyzer Manual
      by Document Archive
      Postcard 32 4-Bit 4-Digit Diagnostic Card PC Analyzer Manual

      Diagnostic Card is a powerful diagnostic tool for technicians and administrators to troubleshoot
      various problems of IBM compatible PCs. It is easy to install, yet extremely powerful to use. With
      Diagnostic Card in hand, you no longer have to go through tedious and time consuming process of
      trying to figure out what is wrong with your PC hardware. Diagnostic Card will tell you exactly
      what is wrong with your PC in just seconds. It saves you time and money.

      Our new and improved design...
      11-01-2024, 06:29 AM
    • Tynan Dill
      Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
      by Tynan Dill
      I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

      Upon bringing it home and plugging it up, it showed a standby light.

      I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

      The screen seems to blackout and stay black, but with a flashlight I can see the display.

      With my Playstation 4 connected via HDMI, and running a game I can hear sound.

      Assuming...
      11-22-2024, 01:46 PM
    • jaroslav.psenicka
      Apple MBP A1398 EMC 2881 No backlit, PP3_G3H drops to 10.8V after start, 0V on LVDS pin 1
      by jaroslav.psenicka
      Hi all,

      I have a MBP A1398 EMC 2881 here, it chimes, boots and shows picture on external screen
      there is an apple logo on the display, no backlit

      I measured the PP3_G3H on the backlit fuse - it's 12.6V when not powered and it drops to 10.8V after startup.
      Is this OK?

      Also measured the LVDS connector pin 1, there is 0V, could that be the backlit driver chip?
      Also checked all 4 "backlit" capacitors, all OK, not shorted.

      Thank you very much,
      -jp
      12-02-2024, 01:29 PM
    • Kyleadonis
      Launch Automotive Diagnostic Tool Missing Diode and Cap
      by Kyleadonis
      Hi there, I need some help identifying replacements for a Launch Diagnostic Plug In Tool. I can't seem to find any information on the LF 7HZPU Diode so I have no idea what to replace it with if anyone can help? Also there is a missing component on the side that I highlighted in green and I assuming it's a cap?

      I have added some photos for reference....
      09-03-2024, 11:54 PM
    • SeaglassPearl
      Vizio E420VA 5v drops to 3v when power cable is connected
      by SeaglassPearl
      Folks, I have a Vizio flat screen that doesn't show any signs of life (and no orange vizio glow either).

      I tested the voltages from the power board (at the connector) and I can see the 5V supply drops to 3V after the power cable is connected to the main board (5V supply reads as 5V when cable is disconnected from main board). All other rails (12V and 24V) are reading fine.

      I looked for the usual bloated caps and saw none on either board and no other tell-tall signs (black marks, burned components, etc) on either side of both boards.

      Given the 5V rail...
      12-30-2022, 05:55 PM
    • Loading...
    • No more items.
    Working...