how to start plasma ps51d6900 power

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • hispeck
    Badcaps Veteran
    • Aug 2015
    • 258
    • nigeria

    #1

    how to start plasma ps51d6900 power

    hello, need help on how to start the power direct without main board, this tv will start and display smart tv then after a while it will go off and re-start again, during then i check the va vs voltage, they are not stable, so i want to start the power alone to see if is ok
  • Andrew F. Ali
    Badcaps Legend
    • Jan 2014
    • 2450
    • Trinidad & Tobago

    #2
    Re: how to start plasma ps51d6900 power

    Post a focused close up photo of the PSU, PSU Connector that goes to the Main Bd, and Vs to Y-sus Bd. connector on the PSU so we could read the labels on the connectors. What is the Vs and Va voltages on the sticker?

    Comment

    • hispeck
      Badcaps Veteran
      • Aug 2015
      • 258
      • nigeria

      #3
      Re: how to start plasma ps51d6900 power

      just some few mins ago, after i started troubleshooting one after the other, first i removed the connector from logic board to zsus and powered the tv on, the vs and va was still dropping then i remove the one to ysus and powered the tv, all voltage remains on, mean the va and vs, now is clear now that my problem is from the ysus that is making the voltage drop, any idea how i can trace the short component?

      Comment

      • hispeck
        Badcaps Veteran
        • Aug 2015
        • 258
        • nigeria

        #4
        Re: how to start plasma ps51d6900 power

        here is the picture,
        Attached Files

        Comment

        Related Topics

        Collapse

        • Tynan Dill
          Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
          by Tynan Dill
          I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

          Upon bringing it home and plugging it up, it showed a standby light.

          I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

          The screen seems to blackout and stay black, but with a flashlight I can see the display.

          With my Playstation 4 connected via HDMI, and running a game I can hear sound.

          Assuming...
          11-22-2024, 01:46 PM
        • PantherDave
          Microsoft Surface Pro (5th gen) model 1796 - no power
          by PantherDave
          Hi all!

          I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅

          I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
          https://www.badcaps.net/forum/troubl...-hardware-devi...
          05-29-2024, 02:01 PM
        • GLISIT
          Asus Probook P5440UF-XB74 power issue
          by GLISIT
          Hi all,

          TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!


          I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!

          A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about...
          01-16-2025, 02:29 PM
        • sam_sam_sam
          Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
          by sam_sam_sam
          I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

          One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
          03-31-2024, 02:12 PM
        • Document Archive
          HP Pavilion Power Pavilion Power 15-cb009nl Notebook 15 Specification for Upgrade or Repair
          by Document Archive
          This specification for the HP Pavilion Power Pavilion Power 15-cb009nl Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Pavilion Power 15-cb009nl boardview and Pavilion Power 15-cb009nl schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that...
          09-06-2024, 05:59 AM
        • Loading...
        • No more items.
        Working...