1. Use a stick with the smallest capacity (max. 16Gb)
2. You use another stick
3. Type MENU 4725 and see if the panel has changed to VES400UNES-05-B
4. If something hasn't changed, you're not doing it right.
Yes I saw that option to change the logo, but the option is put to read-only I can't change it. The option was grated out. Or is there a way to remove that read-only?
Save the TV profile on the stick.
1. Format the stick with fat 32
2. Create a folder called downloadprofile.mb95 on the stick
3. MENU, 4725, USB Operations, OK.
4. Post the resulting profile from the stick and make the change
Save the TV profile on the stick.
1. Format the stick with fat 32
2. Create a folder called downloadprofile.mb95 on the stick
3. MENU, 4725, USB Operations, OK.
4. Post the resulting profile from the stick and make the change
Comment