Bad panel

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • TimT
    Badcaps Veteran
    • Nov 2012
    • 268
    • us

    #1

    Bad panel

    Sorry no info on the Tv. it has been posted for sale, don't know if the panel is bad?
    Attached Files
  • Davi.p
    Badcaps Legend
    • Sep 2009
    • 4266
    • Italy - Milan

    #2
    Re: Bad panel

    Can be bad, but surely it's a bad tcon..

    Comment

    • CapLeaker
      Leaking Member
      • Dec 2014
      • 7982
      • Canada

      #3
      Re: Bad panel

      I wouldn't touch that if they want $$$ for it.

      Comment

      • ducky29
        Badcaps Veteran
        • Dec 2015
        • 370
        • Europe

        #4
        Re: Bad panel

        Pretty sure its a faulty screen

        Comment

        • Andrew F. Ali
          Badcaps Legend
          • Jan 2014
          • 2450
          • Trinidad & Tobago

          #5
          Re: Bad panel

          If you can get to do some voltage checks on the T-CON Bd. before or if it is really cheap take a chance and replace the T-CON Bd.

          Comment

          • TimT
            Badcaps Veteran
            • Nov 2012
            • 268
            • us

            #6
            Re: Bad panel

            Thanks everyone


            seems it's split 50/50 on t-con and panel I decided to pass on it.

            Comment

            • tom66
              EVs Rule
              • Apr 2011
              • 32560
              • UK

              #7
              Re: Bad panel

              almost certainly panel. Bar on right with column of dead pixels is clue here - that is a shorted driver IC I reckon. Maybe water damaged. Avoid like plague.
              Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
              For service manual, schematic, boardview (board view), datasheet, cad - use our search.

              Comment

              • Davi.p
                Badcaps Legend
                • Sep 2009
                • 4266
                • Italy - Milan

                #8
                Re: Bad panel

                I think for sure it shows a bad tcon, bad supply tensions, but the initial defect can be panel that shorted something on tcon. Not possibile to say if bad board component or bad FPC IC. Anyway abs. not for beginners..

                Comment

                • tom66
                  EVs Rule
                  • Apr 2011
                  • 32560
                  • UK

                  #9
                  Re: Bad panel

                  Originally posted by Davi.p
                  I think for sure it shows a bad tcon, bad supply tensions, but the initial defect can be panel that shorted something on tcon. Not possibile to say if bad board component or bad FPC IC. Anyway abs. not for beginners..
                  I am almost certain bad panel, very unlikely t-con with this defect.
                  Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                  For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                  Comment

                  Related Topics

                  Collapse

                  • howardc64
                    LG 49UJ6500 LCD panel lighter band that goes away
                    by howardc64
                    49UJ6500 LCD panel has a lighter band on top when first powered on. Goes away (or gets much fainter) after TV on for a few min. After powered off for awhile and power back on, same band appears. If powered on immediately after powering off, no or much fainter band. Running the latest firmware.

                    Disassembled the TV and lifted the LCD panel during testing. Band is on the LCD panel (can see the band on the panel as I lift it slightly) Backlight is perfectly even at the top edge. Double checked LCD panel alignment in the frame and is perfect but since band moved with the panel, its on...
                    02-19-2023, 12:13 AM
                  • triplefour
                    SAMSUNG UN50TU8000F rebooting, backlight ok. No 12v to panel boards.
                    by triplefour
                    TV flashes backlight then reboots over and over. no image. Client said it used to have image for a bit before rebooting. Got worse over time.

                    tcon is built into mainboard.
                    Only one cable goes to panel boards.
                    there is a cable from one panel board to the other that links them.
                    cost cutting measure that results in us having harder time to diagnose.
                    removing the link to the second panel board allows TV to stay on with stable backlight but no image.
                    used cut off tape method to mask 1 maybe 2 pins on the side of the cable that goes to that second panel board....
                    07-28-2022, 07:59 PM
                  • Storyteller12
                    QN55Q60R Service Menu Panel Help
                    by Storyteller12
                    I had a the above tv qn55q60r that had a bad panel but everything else good. I had another panel here from un55nu6900 with bad leds and melted diffusers.

                    I put the nu6900 panel in and powered it up and it does work but there are lines vertical lines.

                    I was trying to change the panel type in the service menu but don’t see my exact panel. Anyway to fix this or someone have similar experience.

                    the clear picture is the panel type from the service menus on the nu6900. The other 1 is the panel type that was set for the q60r with the bad panel....
                    01-13-2024, 01:57 PM
                  • maneatingmonkey
                    Missing LCD Panel Voltages VGH, VGL, VCOM (TCL 55P6US Sound & Backlight but NO Picture)
                    by maneatingmonkey
                    I have a TCL 55P6US with sound and backlight but no picture. This model does not have a T-CON board, and the right (rear perspective) panel board is fed from the left panel board. I have not been able to induce any change by disconnecting the secondary panel board or the tape cut-off method on the primary board.

                    There are a bunch of voltages missing on the panel boards. I can't find any shorted caps of the panel boards, and all of the missing voltage rails read in the kiloohms, which leads me to suspect the issue may lie on the circuit board, rather than a short in the panel.
                    ...
                    03-27-2024, 07:17 AM
                  • KYBOSH
                    Samsung UN50TU8000 - Dead Panel Forensic Questions
                    by KYBOSH
                    I came across a 50inch TU8000 that wouldnt start up properly (blinking stand-by light, backlights would cycle on and off).





                    When i opened it up and removed the power to the mainboard the backlights powered up and everything looked uniform.
                    When reconnected the mainboard but disconnected the flex cable to the panel i heard the TV startup with the intro sound.






                    Later I checked for shorts on the panel PCB boards but could not find anything.
                    When I took a look with the FLIR i noticed the 2 resistors...
                    08-10-2024, 08:39 AM
                  • Loading...
                  • No more items.
                  Working...