EW39T4LZ westinghouse LCD LED backlight bad need a part / help

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • shelby5041
    Badcaps Legend
    • Feb 2009
    • 1504
    • united states of america usa
    #1

    EW39T4LZ westinghouse LCD LED backlight bad need a part / help

    hi

    i have a westinghouse 39 inch lcd led tv

    model EW39T4LZ

    backlight wont come on...i have power to BL connector 64V

    i took tv apart and found 2 LEds on the 1 of 2 strips were fried...

    im looking for a LED strip part# TC390HJ01-R213

    cant find anywhere online...

    or does anyone know how if and how i can bypass the two bad LEDS...they are the last 2 on the end of the strip..the leds are very very small ..

    this tv only has 2 strips up top that light up the entire screen....
    Attached Files
    Tags: None
    • shelby5041
      Badcaps Legend
      • Feb 2009
      • 1504
      • united states of america usa
      #2
      Re: EW39T4LZ westinghouse LCD LED backlight bad need a part / help

      the photo i included was one from online..same part#

        Comment

        • shelby5041
          Badcaps Legend
          • Feb 2009
          • 1504
          • united states of america usa
          #3
          Re: EW39T4LZ westinghouse LCD LED backlight bad need a part / help

          Are the leds in series?

          If so couldnt i just bypass the end 2 bad leds?

          How would i jumper wire to do this since its at the end of the strip?

            Comment

            • shelby5041
              Badcaps Legend
              • Feb 2009
              • 1504
              • united states of america usa
              #4
              Re: EW39T4LZ westinghouse LCD LED backlight bad need a part / help

              Please disregard the bypassing...i tried and i dont have the proper equip and skills to do it...the leds are way too small to work with

              Does anyone know where i can locate replacement led strip?

                Comment

                Previous template Next

                Related Topics

                Collapse
                • lmcancu
                  RCA RLDED 4331B: 43 inch LED TV: Backlight issue
                  by lmcancu
                  Hi I am having an issue with the LED backlight of this TV. I can see the picture with a flash light, so I determined it was a backlight issue.

                  Initially, after opening it I found 2 shorted and 1 open LED on 2 strips (total of 4). I removed the LEDs and shorted the pads together to verify if the backlight would work.

                  Testing it, I found the backlight turned on and I measured 54V when TV was in standby (off), and 100v when TV was turned on. The 4 strips each contain 9 LEDs, so 36 in all minus 3.

                  Instead of putting it back together I decided to replace...
                  04-01-2023, 01:11 PM
                • Tynan Dill
                  Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                  by Tynan Dill
                  I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                  Upon bringing it home and plugging it up, it showed a standby light.

                  I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                  The screen seems to blackout and stay black, but with a flashlight I can see the display.

                  With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                  Assuming...
                  ORIGINAL POWER SUPPLY BOARD
                  7 Photos
                  11-22-2024, 01:46 PM
                • edugimeno
                  Finding the wrong part at a loooong led strip, part works fine, part flickers, all parallel...
                  by edugimeno
                  Hi There!
                  I'm trying to help my friend who owns a restaurant be just bought.
                  He has a very long LED strip running along all the walls and columns. The strip is attached facing down 2in above the floor, using a wall panel that ends in a metal rail that finishes the panel underneath
                  It's stuck using, I guess, the 2 sided tape that comes with the strip
                  The issue is that like 1/2 of the full length, including 1/2 one wall, another entire wall, and one column, flickers after 4 or 5 minutes ON. Particularly it flashes staying OFF most of the time and flashing ON for 1 tenth...
                  09-05-2024, 09:34 AM
                • hollox123
                  ASUS ROG Strix G713QR - Keyboard, backlight and side LEDs don't work
                  by hollox123
                  Hello, I have an "ASUS ROG Strix G713QR" laptop, and for approx. 3 months I have the following problems:

                  1. Laptop keyboard doesn't work
                  2. The backlight on the laptop keyboard doesn't work
                  3. The x2 side LEDs (red) on the laptop don't work

                  The power button works, the touchpad works, and all the USB, HDMI, Ethernet, etc. ports work.

                  I already tried to reinstall all the drivers and reinstall Windows. So I don't know what to try anymore that is software-related.

                  But I am strongly aiming that it is somehow a BIOS-related problem,...
                  05-11-2025, 08:05 AM
                • spirittoo
                  Sceptre 48" TV backlight LED`s
                  by spirittoo
                  Trying to fix a backlight problem with a Sceptre 48" TV.

                  I found replacement strips with the same part number as the strips in the Sceptre, but the new backlight strips have 5 leds per strip and the ones in the tv has 6.

                  So I decided to replace the leds instead. I found 3 bad ones. I had no problem removing the bad ones with a heat gun, they came right out. However the leds on the replacement strip would not come out with heat. I use my solder iron as well, they will not come off.

                  Anyone know how I can remove those leds without damaging them?
                  11-11-2023, 10:23 AM
                • Loading...
                • No more items.
                Working...