i need dump arielli led2415fhd

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • freecom
    Member
    • Nov 2011
    • 18
    • greece
    #1

    i need dump arielli led2415fhd

    arielli LED2415FHD

    stuck logo and reboot

    T.EME380.61

    panel AUOM24HTN (CX240LEDM) full hd


    spi 25q64

    i need dupm

    thank you !!!
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • cristy72
      Orion CLB22RT500d need good dump 25q64
      by cristy72
      Heloo. I need good dump for Orion CLB22RT500d . My dump is corrupt , continous restart .
      Mainboard is T.SIS231.31 , with 25q64 eeprom .
      Display : T215B1-P01-L05
      I atached here corrupted dump .
      Thanks in advance !...
      11-18-2024, 11:19 AM
    • Ahari
      Request HP Proliant Microserver Gen 8 (J06) BIOS dump to restore system firmware
      by Ahari
      Hi all,

      This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.

      I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.

      I...
      08-13-2025, 06:12 AM
    • spice_disc
      Vizio TV M50-C1 reboot cycle and static on screen
      by spice_disc
      I'm currently trying to diagnose and fix my Vizio TV (Model M50-C1). I've tried a number of different basic solutions, but I'm trying to determine if my issue is currently a failing panel, T-Con board, or main board (or something else entirely) and whether or not it is worth my time to fix it. Details of the issue and what I've tried are below as well as why I think it is either a bad panel, T-Con board, or main board.

      The Issue: The TV will be on and working fine but after the TV is on for ~5-10 minutes the screen will freeze (with sound continuing) until the TV reboots itself. While...
      1 Photo
      09-08-2024, 02:37 PM
    • Habble7
      I need a BIOS dump for the Samsung S49CG934SU monitor
      by Habble7
      The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.

      Suspected Cause:
      I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.

      Troubleshooting Attempts:
      ...
      05-22-2025, 07:28 AM
    • Mephysis
      DUMP DVR HIKVISION DS-7208HGHI-K1 (80389 Rev 1.3 Firmware)
      by Mephysis
      Hello guys i really need help, i recently updated my DS-7208HGHI-K1 and it somehow got bricked, I've got it up and working now by flashing a new dump file i found but the serial number is really wrong and the uploader of the dump file probably intentionally did it.

      I still have the bricked dump file is it possible to transfer the serial number of the "bricked dump" to the "working dump"?
      03-27-2025, 02:34 AM
    • Loading...
    • No more items.
    Working...