Again 6 blinks on a TNPA5335

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • gldiana
    Member
    • Sep 2017
    • 16
    • Italy
    #1

    Again 6 blinks on a TNPA5335

    I'm newbie here.. I have tx-p50gt30 tv, with 6 blinks... Measured >200V on C631, then changed the two DG302 (Q441 Q442) and their drivers IC502 and IC531. Then voltage across C631 dropped to zero (no on board green led on).. Then changed other two DGs and drivers IC522 and IC551..but nothing changes. All parts taken from a working SS board. Both 15V and 5V are there, and Vsus rises to 204V (that should be ok). Checked all diodes and resistor in the recovery section, all seems ok. After this, still 6 blinks!! Can you give me any help to solve this??
    Thank you so much in advance!
    Tags: None
    • gldiana
      Member
      • Sep 2017
      • 16
      • Italy
      #2
      Re: Again 6 blinks on a TNPA5335

      Partially solved: changed IC16562 and no more six blinks...Now the board goes...

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Biruslapio
          Panasonic P58V11B 8 and 12 blinks error "fix"
          by Biruslapio
          Bought this TV used not working, panel flashed briefly on power up and it was blinking 8 times, a quick look on SS board revealed a common fault on the 3uF 250V capacitors, C201 to C205 (C1620X in the service manual), the solder joints were all cracked, C201 and C205 pins were darkened and some sparking had occurred on them, C201 was split open and clearly overheated in its last hours, replaced that one and resoldered the others, 8 blinks fixed.

          Also the previous owner broke the antenna connector by taking the TV out of the wall mount forgetting to unplug it, I desoldered the tuner...
          04-13-2021, 07:13 AM
        • Userrrname
          Tx-pr42gt30 6 blink
          by Userrrname
          πŸ‘‹πŸ»I recently got a tx-pr42gt30, I bought it in non-working condition. When I opened it, I saw that all the transistors and diodes had been removed from the tnpa5330, and several microcircuits were in poor condition, so I decided not to try to repair it. Instead, I bought another tnpa 5330 (also AB), which was already repaired (according to the seller, the board was repaired and worked before the screen was damaged), transistors were also changed on it, but Chinese copies were installed (there is no round hole in the middle, the inscription is easily erased) and a pair of transistors that...
          07-19-2025, 07:53 AM
        • Andre Gilbert
          Panasonic TC-P55ST50 8 blinks then no blinks
          by Andre Gilbert
          Hello! yes I know there is already lots of information about this issue. I have a Panasonic TC-P55ST50 that originally displayed an 8-blink error code. Following the troubleshooting flowchart, I ended up replacing the SS board. However, even after replacing it, the issue persists. The TV turns on and stays on without displaying an image, and continuity is confirmed on all connectors. What am I missing hereπŸ€”?
          Ok Im a mechanical engineer ...but I thought I was able to follow a rather simple flowchart for electric troubleshooting πŸ˜‚.

          TV Model: Panasonic TC-P55ST50
          ...
          1 Photo
          11-20-2024, 08:52 PM
        • throwaway327
          Asus ROG Ally X -RC72LA - changed hidden bios settings with 'Smokeless-UMAF', won't get past boot logo
          by throwaway327
          ASUS ROG Ally X - (Handheld Gaming PC)
          Model No: RC72LA
          Serial No: SBNVKD001014459

          Hi all, I've spent the past week digging through the forums and guides to try correct my foolish mistake of changing hidden settings while tinkering around, and to be honest my heads overloaded so I'm hoping you'll be able to help.

          I used a tool called 'Smokeless-UMAF' to access usually hidden settings in the bios. I tweaked one or two 'safe' things but made the mistake of tweaking a lot of settings under 'USB/Thunderbolt Configurations' when I didn't know what they did. For...
          06-18-2025, 05:52 PM
        • Taurus12
          Optiplex 3050 micro 2 blinks followed by 3 blinks issue
          by Taurus12
          Does anyone have an idea of what might be the issue with my 3050 micro? I have tried replacing new cmos battery but still the same

          I am not sure if its the powersupply that I'm using is the issue since its the original powersupply. its a laptop powersupply with the same specifications with the 3050 micro so i guess it should be fine.

          i also tried replacing the bios but with no avail, everytime i try another bios it gives a different blinking lights

          Any recommendation on what I have to do next? Thanks in advance
          06-10-2025, 05:05 PM
        • Loading...
        • No more items.
        Working...