Skyhi SK32K70 TV - Struck on Android screen - Main board is TP.MS608.P83

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Gavino_varne
    Gavino
    • Oct 2017
    • 5
    • India
    #1

    Skyhi SK32K70 TV - Struck on Android screen - Main board is TP.MS608.P83

    Hi dear Friends !!!

    I have a Skyhi 32 LED TV which is struck on android screen and does not go any further. I have tried multiple reset combinations from your forum's assistance and nothing seem to work. The main board on my TV is TP.MS608.P83. I am not sure what are the steps to try to resolve this issue. I also need to know the combination keys to try a reset being the least step I wish to do at this point. I humbly request my friends here to please share your thoughts.


    Thanks in advance.
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • m1ch43lzm
      HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
      by m1ch43lzm
      Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
      Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
      05-12-2025, 08:37 PM
    • ygorsan
      LG 55NANO77SRA TV ā€“ Menu scrolling by itself even after removing button board (Main Board EBU66792103)
      by ygorsan
      Hi everyone,




      Iā€™m looking for help with a persistent issue on an LG TV model 55NANO77SRA, which uses the main board EBU66792103 (also used in LG UQ80 and NANO75/NANO80 series).







      šŸ§© Problem Summary:
      • The TV keeps scrolling through the menu or selecting items by itself.
      • I removed the physical button board (the entire panel with power and volume buttons) and also disconnected the flat cable (CN202) from the main board.
      • The remote control is not in use (batteries removed), and the TV still shows the same behavior.
      • I
      ...
      07-28-2025, 08:34 AM
    • jb_Bak
      Sony xbr-65x900c main board issues?
      by jb_Bak
      Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

      Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
      Power Board Connector that goes to Main board
      CN6401
      Pin 01 NC
      Pin 02 NC
      Pin 03 "BL_ON": 0V
      Pin 04 "N/C"
      Pin 05 "STBY 3.3V": 3.5V
      Pin 06 "GND": N/C
      Pin 07 "AC_OFF"...
      09-27-2021, 04:52 PM
    • JDC
      (SOLVED) - ONN 100012588 No Power, Then Rebooting After Main Board Change
      by JDC
      ONN 100012588
      Issue: No Power, Then Rebooting After Main Board Change

      Short answer: replace main board and power board
      Technical answer: replace main board and Q306 & Q307 on power board.

      Long answer:

      TV wouldn't turn on. Power switch was fine which means the main board isn't processing the power on signal. Replaced main board. TV turns on now but randomly reboots. Bad main board? EEPROM? Tried to pull main board and got a shock touching the corner of the board. That's weird. C334 (450V 10uf) capacitor is still holding a high charge....
      07-15-2022, 07:39 AM
    • advant
      Driving a Sharp TCON/panel with a universal main board
      by advant
      This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

      I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
      02-03-2020, 12:25 AM
    • Loading...
    • No more items.
    Working...