LG 50PA5500 NO power

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • lajabba1985
    New Member
    • Jun 2017
    • 4
    • United States

    #1

    LG 50PA5500 NO power

    So here is the problem. I have a LG 50PA5500 that took a power surge through the HDMI port. It would not power up or anything. I replaced the power board and still had nothing. So i disconnected all cables coming off the power board. When i plugged in to power i heard a click and herd some humming(good sound I hope). I then proceeded to plug in the cable that was near the slot labeled VATP on the power board all went well still have power. As soon as I plug in the cable going to the main board pt #EBT 62145301(where the HDMI ports are at) I loose power. With that being said do I have a bad main board too? I know when i check voltage i do have it at the cable that plugs into the main board.
  • dskall
    Badcaps Legend
    • Oct 2016
    • 2905
    • usa

    #2
    Re: LG 50PA5500 NO power

    If you had power surge through hdmi then you will have damaged main board.
    I assume no responsibility for any stupid suggestions I might post.

    Comment

    • lajabba1985
      New Member
      • Jun 2017
      • 4
      • United States

      #3
      Re: LG 50PA5500 NO power

      Follow up. I have replaced power board(which gave me power finally, and replaced main board which has given me standby by power and ability to turn off and on, however i still have no picture. When I turn unit on i see a quick flash of the screen then nothing total blackness. Any ideas would be nice.

      Comment

      • tom66
        EVs Rule
        • Apr 2011
        • 32560
        • UK

        #4
        Re: LG 50PA5500 NO power

        Can you see some points on the control board (middle green board) marked EXT AUTO GEN
        Put a wire link between these then disconnect the cable between the control board and the main board
        If you see test patterns, the main board is probably at fault
        If not, something else is wrong.
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • lajabba1985
          New Member
          • Jun 2017
          • 4
          • United States

          #5
          Re: LG 50PA5500 NO power

          ooohhhhh pretty colors and movement. That worked I have a test pattern but I just replaced the main board, the original main board did not even allow a power up. Could the y sus or z sus be bad? Damn lightning did some damage. Thanks for the help tom66
          Last edited by lajabba1985; 07-01-2017, 01:31 PM.

          Comment

          • tom66
            EVs Rule
            • Apr 2011
            • 32560
            • UK

            #6
            Re: LG 50PA5500 NO power

            No since you got test patterns everything except the main board is good. I'm assuming all the colours looked good with no obvious distortion/etc.
            You got a bad main board, so send it back to the seller and ask for a refund/replacement.
            All too common for people to buy faulty boards and replace the wrong things.
            Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
            For service manual, schematic, boardview (board view), datasheet, cad - use our search.

            Comment

            Related Topics

            Collapse

            Working...