LCD TV Backward

[Andrew F. Ali]

Hi Folks. I was wondering if the sheets for the panel are place in the incorrect order like in this order: on the LED backlight- stiff prism plexi- sheet, polarizer, diffuser as the sheets weren't marked to remember the order of removal. Would the TV backlight still pass through and show picture??

[Andrew F. Ali]

Re: LCD TV Backward

Anybody?

[dick_barton]

Re: LCD TV Backward

It believe that it would have noticable affect on the picture so I tape the layers together at the corners so the order cannot be mixed up.

[attainteddragon]

Re: LCD TV Backward

pity you didn't post this 24 hours earlier, i was doing some back lights and had a set apart, so i could of run some tests for you.

[dskall]

Re: LCD TV Backward

The thick one is first. I think you should get light through in any order.

[Andrew F. Ali]

Re: LCD TV Backward

Thanks for the responses Guys. I usually mark the layers when removing but never committed to memory the order. This panel came to me dismantled as the Owner felt he could repair it himself. He god cold feet midway though, and I was asked to assist him. I didn't want to look like a total idiot. Much appreciated.

[dskall]

Re: LCD TV Backward

Hope panel is still good