Announcement

Collapse
No announcement yet.

PANASONIC tx-l32e5e 8 blinks

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    PANASONIC tx-l32e5e 8 blinks

    Hi
    i have an PANASONIC tx-l32e5e that gives 8 blinks error code
    the descripion of error is (SS energy recovery circuit )
    what cirquit is this? can someone welp-me troubleshoting.
    Attached Files

    #2
    Re: PANASONIC tx-l32e5e 8 blinks

    May refer to Power factor correction
    I assume no responsibility for any stupid suggestions I might post.

    Comment


      #3
      Re: PANASONIC tx-l32e5e 8 blinks

      Well in this manual from first post it says just SOS. Not exactly where to look for error.
      This is LCD and it does not have an SS board, and therefore no SS energy recovery circuit like plasmas do, so this 8 blink SOS is some general error.
      I may be wrong though...

      Comment


        #4
        Re: PANASONIC tx-l32e5e 8 blinks

        Think you will need to post pictures, description of problem and some voltages.
        I assume no responsibility for any stupid suggestions I might post.

        Comment


          #5
          Re: PANASONIC tx-l32e5e 8 blinks

          hi
          the test point on psu al mesured and ok
          test points on main board i am unable to mesure because no boardview and no seriagrafia

          Comment

          Working...