Hi folks, having an issue with my Samsung TV, when I connect the N240 docking board to the main unit the supply 6.3A fuse blows. I'm looking for the schematics to help me out. side note during the troubleshooting I managed to blow out the NT801s DSC 10D-15 Thermistor quite spectacularly would love to understand why!
-
-
Re: Samsung UN55C9000
Any good clear pictures of what we are dealing with to see how all the boards are connected together?
NTC will blow if the load is shorted I.E. bridge rectifier, PFC Power MOSFETs, etc.Last edited by budm; 05-03-2017, 03:37 PM.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809 -
Re: Samsung UN55C9000
please see PDF for details of work doneAttached FilesComment
-
-
Re: Samsung UN55C9000
hi folks, i'm still trying to get the schematics for this TV, anyone got a link pls? i've checked the ones here.Comment
-
Re: Samsung UN55C9000
https://elektrotanya.com/samsung_ua5.../download.html
I think this will do. ( did not open the file ).
On the bottom of the page it says "processing" , wait till it changes from processing to download.I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!
Comment
-
Re: Samsung UN55C9000
unfortunately this is nothing more than parts list and exploded view of how to disassemble tv. no schematic, no service manual.Comment
Comment