Picture is solarized as shown in photo. I have cleaned t-con connections, re-flowed the ground pins on the t-con connector, and the issue persists. Any ideas? SMPS tests perfectly. Also cleaned the t-con connector on the main board. TV has sound and video, all other functions are fine. Customer stated that the picture was dim so he used a can of air duster on the set and now this picture problem started.
Sanyo DP46819 Picture Issues
Collapse
X
Related Topics
Collapse
-
Hi,
I have a VIZIO E70-E3.
Symptoms: Black screen, no picture, but LED backlights are working.
I probed the power board and voltages are as listed on the board.
Main board appears fine, too.
I believe the problem is either a bad T-CON board, or connection to LCD, or bad LCD.
There are two separate ribbon cables feeding the LCD.
If both are connected, the screen is black.
If only the ribbon cable that feeds the right side of the screen (when viewed from the front) is disconnected, the left side of the screen shows picture and... -
by x_orange90_xJust bought this for 10 bucks yesterday hoping to fix it. The guy said water dropped inside from a dehumidifier hose and it started showing black and white vertical bars then went blank. When I got it home and turned it on it came on fine and displayed correctly but I was noticing faint vertical bars in the image. After a little bit I turned it off and back on and it was a black screen again. I opened it up to check for water damage and corrosion but didn't find anything of the sort. I cleaned the ribbons anyway and reconnected them but still got a blank screen. If I disconnect the right side...
-
by JJAAMMThis was my main TV for the last 6 years. I'm not inclined to throw out a $2600 TV so quickly so I'm trying to investigate the issue.
Problem
TV was disconnected from power for 6 months during construction. When I plugged it yesterday picture was fine, after 30 seconds it dimmed then started developing horizontal lines, picture then starts to ghost vertically until it degrades into vertical streaks. TV always displays a perfect picture when cold. I can unplug TV for 5 minutes and plug it back in and picture is restored for 20 seconds. I can also keep it in standby mode... -
by homergingHello,
could anyone please tell me what is likely to be causing the CRT picture quality issues as shown in the attachments and what it'd take to fix it if that is possible?
The picture has a greenish tinge, colour scan lines are separated and there can be shimmering and the bottom can be missing at first. It has slowly gotten worse over time.
It is worst when first turned on and slowly improves but not resolves over a period of approximately 90 minutes. Warmer room temperatures possibly have a positive influence.... -
by TR103Hi, I have a Samsung UE50TU with:
- sound and backlight, but no picture
- when it arrived, it had a picture for a few seconds
- it keeps rebooting
- without ribbon cable between the two panel boards, it does not reboot but I have no picture
- without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
- when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.
- without cable between mainboard and lcd panel and with a jumpered... - Loading...
- No more items.
Comment