samsung PS51D550

[jmh474]

ok to i have a samsung PS51D550 plasma tv, it came to me not powering up and just clicking so i thought easy fix caps on main board.... i was wrong now iv come to find that its the xsus board.

sounds good so far still easy fix, this is where my problem is finding the right xsus board, i buy most of my parts on ebay uk (unless you know better please tell me), my problem is i type in the PCB No LJ41-09422A and it brings up different types of the same board,

part 1

http://www.ebay.co.uk/itm/LJ41-09422...UAAOSwLF1X6BeB

part 2

http://www.ebay.co.uk/itm/LJ41-09422...8AAOSwMVdYHJ4f

there is a £20 difference may not be alot to some people but it is to me, this is the board i need any help would be grate

[jmh474]

Re: samsung PS51D550

if im right and the numbers do matter i think iv found the right one

http://www.ebay.co.uk/itm/Samsung-Xs...QAAOSwA3dYVDFr

[jwheff]

Re: samsung PS51D550

if im right and the numbers do matter i think iv found the right one

http://www.ebay.co.uk/itm/Samsung-Xs...QAAOSwA3dYVDFr

How'd you go with your one using that part?

My TV has been sitting in the garage for about a year and I'm just getting around to searching for parts again.

From memory had no power at all, just bought a main PS board and it now has power. But clicks then has a 5 x 2 red blinking light.

I'd like to be able to attempt repairs myself but don't have much experience, so I think I'll be looking to source both the Y and X boards to see if I can get it going again.

[StephenU]

Re: samsung PS51D550

@jmh474

Pretty sure I have one of these TV's in at the moment, panel was damaged, if you haven't purchased already I can double check tonight and let you know?