Eeprom dump thread!

[lotas]

Re: Eeprom dump thread!

On the programmer - erase, write down my dump, check and solder back to the motherboard.

[jimbofz]

Re: Eeprom dump thread!

thanks for all your help
now i have same fault
so i will order a new spi chip and reload your dump
it could simply be the chip is faulty
all the supplies are good and clean
i will report back

[lotas]

Re: Eeprom dump thread!

If you saved your old dump before updating via usb, then you could know for sure whether the problem is in the firmware or not. Always before experimenting with your firmware, you need to make a backup of your dumps, so that if something is wrong, then they can be returned back.

[jimbofz]

Re: Eeprom dump thread!

i now understand thanks for advice

[jimbofz]

Re: Eeprom dump thread!

hi can anyone help with dump for philips 65PUS6162,05
MB NUM:715G8709 MOE BOO 005N
maybe the same as 55inch model?

chassis TPM17.7E LA

[yokoono]

Re: Eeprom dump thread!

Chassis TPM17.7E LA or TMP17.7E LA ?.

[jimbofz]

Re: Eeprom dump thread!

im confused?

[jimbofz]

Re: Eeprom dump thread!

sorry its TPM i must remember to wear my glasses

[luzmina]

Re: Eeprom dump thread!

jimbofz: in those Chinese tvs, if the only issue is no sound the problem is the sound amp, make sure the sound IC has power before replacing it, if no sound after replacing it then the issue is the microcomputer.

[lotas]

Re: Eeprom dump thread!

hi can anyone help with dump for philips 65PUS6162,05
MB NUM:715G8709 MOE BOO 005N
maybe the same as 55inch model?

chassis TPM17.7E LA

Here the error is not "O", but "0" correctly so 715G8709 M0E B00 005N

[yokoono]

Re: Eeprom dump thread!

sorry its TPM i must remember to wear my glasses

Software pkg
https://files.fm/u/eqd8g2ejw

[jimbofz]

Re: Eeprom dump thread!

Try

many thanks
new spi chip with your dump works fine on technika

[jimbofz]

Re: Eeprom dump thread!

Software pkg
https://files.fm/u/eqd8g2ejw

many thanks for this dump
im having problem writing extracted .bin file to chip
my new chip is :st m24128b wmn6p
the ch341a programmer only has up to
m24c64 when you select manufacturer st from list
when i select atmel at24c128bi get
"chip memory with contents disagreement " message
can you advise please

[lotas]

Re: Eeprom dump thread!

many thanks for this dump
im having problem writing extracted .bin file to chip
my new chip is :st m24128b wmn6p
the ch341a programmer only has up to
m24c64 when you select manufacturer st from list
when i select atmel at24c128bi get
"chip memory with contents disagreement " message
can you advise please

What program do you have for CH341A?

[jimbofz]

Re: Eeprom dump thread!

version 1.30

[lotas]

Re: Eeprom dump thread!

version 1.30

Install this program

https://www.badcaps.net/forum/showpo...7&postcount=51

[lotas]

Re: Eeprom dump thread!

Or this

[Slimmwill]

Re: Eeprom dump thread!

can you help looking for firmeware for a hisense h55m3300 can anybody help

[jimbofz]

Re: Eeprom dump thread!

Install this program

https://www.badcaps.net/forum/showpo...7&postcount=51

ok installed siberia prog
LOOKS GOOD DESIGN ,
connected ch341a with new blank eeprom soldered on : m24128 bwmn6p
changed language to english
entered
;EEPROM 24XX
24C128
i get:recognition error?
any ideas ?

[lotas]

Re: Eeprom dump thread!

Do you correctly insert it (eeprom) into the programmer? Post a photo of how it's installed.