"17MB82S 40185DLB ORION ORION PIF40-DLED - august 2014 versiunea 2-electronicforum.ro.ZIP" was just right. The sound and whole system work as should now.
Thank you very much, dani502017, for your help.
Happy New Year to all you guys !!!
Last edited by antas; 12-30-2018, 11:21 AM.
Reason: information update
"17MB82S 40185DLB ORION ORION PIF40-DLED - august 2014 versiunea 2-electronicforum.ro.ZIP" was just right. The sound and whole system work as should now.
Thank you very much, dani502017, for your help.
Happy New Year to all you guys !!!
I'm glad you've solved the problem. Happy New Year!
hello bro I tried firmware of TOSHIBA 32P2305EV.
now led is on (before it was blank screen) language is not english but av picture is good i will try to change language and post result.
pls. if you can provide exact model it will be more help full.i will post 32p2305ev and tcon firmware tomorrow.
Hello Guys
Happy new year to all !
I am writing to you because of my TV SONY BRAVIA KD-49x8307C I have a problem with this model is totally bricked after last update.I have tried to reset it with usb flash drive and the right software provided by Sony but there is no luck.The problem is that when I hold Vol - and Power for 30 Sec. Tv is getting into recovery mode but does not want to download the update from the usb flash drive I have attempted many times...
I need a dump for thee EEPROM or NAND (eMMC) 16 Gb Ic.
NAND Ic is SK hynix H26M52103FMR , and eeprom :Winbond 25x40cling.
Thanks in advance !
Alex
Here is a good .bin for a Vizio E390-A1 Mainboard# TXCCB02K038
The Eeprom is at U409 Winbond 25Q64FVSIG or a Macronix MX25L6445E
This is a good .bin. It fixed my problem. The set would get stuck in standby and would not turn on or off.
Hi, guys.
I have Hitachi 32HYT46U with the problem random switching. Turn on, can see Hitachi logo and turns off then. And the same again. I think that reprogramming of U10 would resolve this problem. If anyone, you guys, have a right bin file, please share with me.
Thank you in advance.
Hi, guys.
I have Hitachi 32HYT46U with the problem random switching. Turn on, can see Hitachi logo and turns off then. And the same again. I think that reprogramming of U10 would resolve this problem. If anyone, you guys, have a right bin file, please share with me.
Thank you in advance.
Unfortunately, with this BIN, it doesn't start at all... The RED and BLUE lights blinking one by one. All the time. With original BIN it starts and shows Logo, then starts again and again.
Any ideas?
Last edited by antas; 01-07-2019, 08:23 AM.
Reason: info update
Unfortunately, with this BIN, it doesn't start at all... The RED and BLUE lights blinking one by one. All the time. With original BIN it starts and shows Logo, then starts again and again.
Any ideas?
Comment