Re: Sony Bravia KD55/49xe8096 EMMS dump


it is available here but I can't sign up .....
[url]https://****************/dump/lcd_pdp_tv/po_shassi/sony_kd_49xf8096_shassi_main_board_1_981_326_12_bfx/335-1-0-124128[/url]Re: Sony Bravia KD55/49xe8096 EMMS d...0-124128[/url]...

hello guys
I am looking for this dump if somebody has I will be very grateful to share it .
best regards !
ALex

Re: Sony KD-65XE9005 emmc .

you just need the dump and flash it nothing else

Re: Emmc RT809H and Sony kd55x8505c SK Hynix H26M52103FMR

Yeah I know that about the CPU all is working in order the only thing is that somehow RT899H does not program this emmc in the right way ....I a lot of times shows error I can get it how ones is able to read after few minutes is not error after error....I am thinking to buy better one obviously is not working properly ....today I have tried to read a working emmc from 49x8307 is not possible to read user and again error with the rest disconnect it once twice and it works again ridiculous ....

Re: Emmc RT809H and Sony kd55x8505c SK Hynix H26M52103FMR

The problem is that the Emmc does not want to boot from usb in recovery mode I have tried many times it is totally dead .The only corrupted file is user data life time used 100% .

Hello guys
One million dollars question.
The problem is I have this tv with almost dead Emmc if I hold Vol - and Power button for about 40 sec. it goes in Recovery mod but does not want to boot from USB . I read the Emmc H26M52103FMR 16Gb and shows that User date is damaged corrupted. I have bought the same Emmc I copied all Boo1 Boot 2 and CSD_EXT file 512 kb from oem old emmc and the user date 14.6Gb from another dump but same model TV. Reballing reading and writing went without any problems but when I soldered back on PCB the TV does not go even in Recovery mod totally dead.I...

Re: Eeprom dump thread!

Hello Guys
Happy new year to all !
I am writing to you because of my TV SONY BRAVIA KD-49x8307C I have a problem with this model is totally bricked after last update.I have tried to reset it with usb flash drive and the right software provided by Sony but there is no luck.The problem is that when I hold Vol - and Power for 30 Sec. Tv is getting into recovery mode but does not want to download the update from the usb flash drive I have attempted many times...
I need a dump for thee EEPROM or NAND (eMMC) 16 Gb Ic.
NAND Ic is SK hynix...

Re: Power suply doesn't work (DPS-214CP)

Hello guys I have the same problem but with Delta smps on Grundig ...Ic DDA010 and IN1M101 ...I saw this post and I have to say that all of my elements are ok even I have changed both IC'S but still the same symptoms ..I have two questions to you do you have pulsing on Vcc pin on Ic DDA010 ??
Did you check the capacitor 22pF 1Kv and diodes which are connected to the primary coil of your transformer ?
My st by is only 3,6 V ...You have to tray to diskconnect the jumper between both ic's Vcc jumper then if the tv works and goes...