Hi, guys. I have here TV Nordmende NM40125DLED. It keeps restarting all the time. I think that reset to factory settings should resolve this problem. Any chance to reset by USB with firmware? Or to flash U10 and U12? If anyone, you guys, has a possibility to help me, please help me
Nordmende NM40125DLED
Board: 17MB82S
Panel number on the pictures (don't know which one it is)
Thank you in advance for any help.
Regards
Hi, guys. I have here TV Nordmende NM40125DLED. It keeps restarting all the time. I think that reset to factory settings should resolve this problem. Any chance to reset by USB with firmware? Or to flash U10 and U12? If anyone, you guys, has a possibility to help me, please help me
Nordmende NM40125DLED
Board: 17MB82S
Panel number on the pictures (don't know which one it is)
Thank you in advance for any help.
Regards
Thank you so much, dani502017, for your help. The TV started. All is good apart from the sound. Could be the problem related to not original software? Or the problem can be somewhere else? Thank you for any answer.
Thank you so much, dani502017, for your help. The TV started. All is good apart from the sound. Could be the problem related to not original software? Or the problem can be somewhere else? Thank you for any answer.
I can send you a firmware for your board but im not sure if its the correct screen/tuner/speaker etc etc. I can also get the correct firmware but I have to order it from my supplier.
Hello,
Does anyone have an Eeprom dump (or Dumps) for a Vizio E390-A1? There are 2 Eeproms on this mainboard. A Winbond 25Q64FVSIG at U409 and a 24C64F at U408. I believe my problem is with the Eeprom at U409.
Mainboard# TXCCB02K038
Panel# TPT390J1
It is not fair not to post here the software, maybe there are others who need it. Today I will not post anymore, I will send them by email.
Merry Christmas everyone!
It is not fair not to post here the software, maybe there are others who need it. Today I will not post anymore, I will send them by email.
Merry Christmas everyone!
Vestels firmware are very specific. I don't the screen/tuner/model/make. So I think its useless to post it here. I can post only the firmwares/dumps that im aware of their panel etc here.
check the menu settings in the service menu, see which norm is set. Did you try out the headphones if you sound?
Thanks,dani502017, for your reply. Yes, I tried headphones-no sound at all. The speakers are good as well. All settings are OK. Looks like something wrong in mainboard or in the brain itself (U10 or U12 ?) ...
Comment