LG Blank screen

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • andrews7523
    Senior Member
    • Apr 2015
    • 117
    • lancashire

    #1

    LG Blank screen

    Hi i have a Lg 55uh661v with a black screen. Ive tried removing each tab which goes to the screen as it doesn't have a Tcon. Ive been told this can be fixed is that right? I know I've had a main board cause this fault but only as it was the incorrect one fitted by the factory
  • Andrew F. Ali
    Badcaps Legend
    • Jan 2014
    • 2450
    • Trinidad & Tobago

    #2
    Re: LG Blank screen

    Removing the TABs was not a good idea. To replace them you would need a Tab Bonding Machine......Maybe those who told you it was easy to fix have the skill and precision machinery to re-bond TABs to the screen. An incorrect Main Bd fitted at the factory......hardly likely yet possible......Then there would have been a recall of that Brand and Model.....I haven't heard of any.....

    Comment

    • andrews7523
      Senior Member
      • Apr 2015
      • 117
      • lancashire

      #3
      Re: LG Blank screen

      I meant the ribbons from the mainboard not the actual tabs on the screen

      Comment

      • dskall
        Badcaps Legend
        • Oct 2016
        • 2905
        • usa

        #4
        Re: LG Blank screen

        Do you have backlights, sound?
        I assume no responsibility for any stupid suggestions I might post.

        Comment

        • andrews7523
          Senior Member
          • Apr 2015
          • 117
          • lancashire

          #5
          Re: LG Blank screen

          It has backlights. Ive not plugged anything into it but i dont think theres any sound

          Comment

          • budm
            Badcaps Legend
            • Feb 2010
            • 40746
            • USA

            #6
            Re: LG Blank screen

            Can we at least see the pictures of the whole back side of the TV showing all the boards so we can see what we are dealing with?
            Never stop learning
            Basic LCD TV and Monitor troubleshooting guides.
            http://www.badcaps.net/forum/showthr...956#post305956

            Voltage Regulator (LDO) testing:
            http://www.badcaps.net/forum/showthr...999#post300999

            Inverter testing using old CFL:
            http://www.badcaps.net/forum/showthr...er+testing+cfl

            Tear down pictures : Hit the ">" Show Albums and stories" on the left side
            http://s807.photobucket.com/user/budm/library/

            TV Factory reset codes listing:
            http://www.badcaps.net/forum/showthread.php?t=24809

            Comment

            Related Topics

            Collapse

            • Ryan.man
              Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
              by Ryan.man
              Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

              My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

              This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
              02-04-2025, 12:23 PM
            • Chrissygizmo
              Panasonic TX-48CX350B backlights but white screen , blank screen
              by Chrissygizmo
              Hi all, I’ve got a problem I hope someone can help me fixi.
              I have a Panasonic TX-48CX350B tv , it powers up ok but the screen is blank, the backlights are working, there’s nothing else though, no picture or sound. I’m not sure what the fault is called whether it’s BLANK/ BLACK/ or WHITE SCREEN I’ve actually came across this before on a similar tv but just ended up scrapping it, I will upload pictures of the boards etc , if anyone could help me I would really appreciate it...
              01-11-2025, 03:18 PM
            • kotel studios
              Funai 32FL553P/10 - squealing from PSU, dies after 10 seconds, blank screen after logo, bootloops
              by kotel studios
              Hi,

              Found an Funai 32FL553P/10 TV on sale for cheap listed as broken, so I decided to give a shot at reparing this.

              State I got it in:
              Squealing from the PSU
              After logo I get a blank screen
              After 10 seconds of having a blank display w/ backlight the TV dies
              Give it 7-10ish seconds again and it starts to bootloop.

              What I did so far:
              Replaced all the caps on the PSU (apart from primaries, they were fine and none at hand)
              Checked all voltage rails:
              5VSB - 4.8V
              AMP+13V - 14.4V
              13V - 12.98V (in manual 12V)...
              09-21-2025, 02:00 AM
            • reformatt
              Macbook Air M2 A2681 Kernel panics after screen replacement
              by reformatt
              Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".

              It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...
              07-31-2025, 08:37 PM
            • Kalman27
              Lenovo IdeaPad Slim 5 14IAH8 - Type 83BF OLED Blank screen
              by Kalman27
              We have a Lenovo IdeaPad Slim 5 14IAH8 - Type 83BF for repair. The original issue the OLED screen is blank.

              We have replaced the OLED screen with the exact model, also we replaced the LCD cable, but no luck.

              I think there is something with the motherboard. I don't really have experience with OLED screens so far, so not sure how it should work. I have seen some laptop comes with a separate controller board, but this model does not.

              Also, there is an error in Windows device manager - This device cannot start (Code 10) - Intel(R) Serial IO I2C Host Controller...
              06-17-2025, 05:52 AM
            • Loading...
            • No more items.
            Working...