Samsung PS-50C91HD - How do I disconnect white ribbon connector from Y-Sustain Board and how do I disconnect Y-Sustain Board from two Y-Buffer Boards?
Announcement
Collapse
No announcement yet.
Samsung PS-50C91HD - disconnecting boards
Collapse
X
-
Re: Samsung PS-50C91HD - disconnecting boards
Connector latches and screws.Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/
-
Re: Samsung PS-50C91HD - disconnecting boards
Its not hard, will link one of my vids on this chassis. We cant help with everything and wipe your ass the whole time you have to try it yourself. Hopefully this can help watch it all the way through.
https://youtu.be/57aDWsiLIxELast edited by ReeceyBurger123; 01-15-2017, 07:42 AM.Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/
Comment
-
Re: Samsung PS-50C91HD - disconnecting boards
Lol I like being a twat sometimes have fun, keep us updated and the same hand you write withPlease Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/
Comment
-
Re: Samsung PS-50C91HD - disconnecting boards
Thanks again ReecyBurger 123. I also have a Samsung PS50P91FD that was not working (click of death) when I got it. I replaced two capacitors (blown) in the power supply and it works very well now (will see for how long). So my questions are - what else should I look out for now that I have the back off it - and should I add cooling fans (if so what and where)? When I do not try to fix broken TVs I try to fix my Land Rovers (all three broken ones) - so you see there is no hope for me! And being down under in the colony makes it worse!
Comment
-
Re: Samsung PS-50C91HD - disconnecting boards
Originally posted by Tuned View PostThanks very much ReeceyBurger123. The video is great. Now I know how to do it without breaking anything. But now I have a new problem - which hand must I use for the wiping? :-)
Comment
-
Re: Samsung PS-50C91HD - disconnecting boards
Originally posted by Tuned View PostThanks petehall347 - but now you have me worried again - what about the people who grab your hand in both of theirs? I am all anxious now and need to watch some TV.
Comment
-
Re: Samsung PS-50C91HD - disconnecting boards
Just a quick report - all went well. Broke nothing and resoldered all the joints of components mounted to heat sinks on Y-Sustain Board. All good now. Does not lose video when hot. I am thinking of modifying the back cover so that I can use it as a toaster - the heat sinks get hot enough! :-)
Comment
-
Re: Samsung PS-50C91HD - disconnecting boards
Add fans and you better heatsink them buffer ICs and recap the ymain and tighten all screws on the ymain and xmain and recap the xmain and recap the psu and then your donePlease Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/
Comment
Comment