VESTEL 17MB25-3 (red,blue green)

[nashagui]

Hello,

I'm repairing a TV OKI V26A-_H with main Vestel 17MB25-3.

TV turns on ok but it had solaried image and I enter in service menu and reset to faltory values, and activate "Burn in mode".

Now, TV turns on but only shows red,blue,green cycle. I can't enter on service menu.

I was "googling" and I think If I change eeprom 24C32 (U103) I can solve it.

some idea???

thx.

[dick_barton]

Re: VESTEL 17MB25-3 (red,blue green)

You can try
https://www.youtube.com/watch?v=fKpJOhMeiSk

[nashagui]

Re: VESTEL 17MB25-3 (red,blue green)

try it but problem continues...

more ideas ?

[dick_barton]

Re: VESTEL 17MB25-3 (red,blue green)

If this is correct then just buy a blank eeprom and replace the existing one although there must be a way of switching the set back to normal.

http://tidelog.kitamuracomputers.net/tag/17mb25/

or this
https://www.youtube.com/watch?v=cbfvKFlCXLg

[ReeceyBurger123]

Re: VESTEL 17MB25-3 (red,blue green)

No need to mess with epproms at all

[ReeceyBurger123]

Re: VESTEL 17MB25-3 (red,blue green)

Simply press "menu" the Tv's menu will come up. Then press on the remote 4,7,2,5 then the service menu will come up. Go down to the bottom option which will be "factory reset" press the right across key on the remote then press the green button on the remote.

The tv will factory reset and the issue sorted.

Or in rare cases simply press "ok" on the remote and the Tv will be revived out of the burn in mode but if that fails do what I said before.

[dick_barton]

Re: VESTEL 17MB25-3 (red,blue green)

There had to be a simple answer. Problem is I didn't know it.

[ReeceyBurger123]

Re: VESTEL 17MB25-3 (red,blue green)

There had to be a simple answer. Problem is I didn't know it.

Lol sorry didn't mean to be that abrasive, just thought I would be stop him spending anything its a free fix haha

[dick_barton]

Re: VESTEL 17MB25-3 (red,blue green)

It wasn't taken that way so no worries.