2008 52" Samsung 4 Series - Tab Bond Failure?

[flexy123]

I already replaced the T-CON (the previous I had resulted in no image AT ALL), but now I am getting this:



The TCON Led is blinking once a second. I can see garbled service menu, OSD etc. There is a very small area where there is a picture.

My question: How can I make sure/trouble-shoot it's a TAB bond problem?

[ozzy214]

Re: 2008 52" Samsung 4 Series - Tab Bond Failure?

Disconnect one lvds cable from t con and re try. This will make one side of the screen dark. See if other good now. If not re hook up and try other. Whichever side you disconnect that makes the other side beter is the bad side. Most likely I doubt that will be fixable, looks like panel failure to me.

[ReeceyBurger123]

Re: 2008 52" Samsung 4 Series - Tab Bond Failure?

Tabs is common on these, check Budms thread on this set.