Corrosion on Panasinic LED 55ET5

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • vz56098
    Member
    • Feb 2015
    • 14
    • Israel
    #1

    Corrosion on Panasinic LED 55ET5

    Hi,
    I have a corrosion on the bottom right and bottom center boards due to water that were stored there due to wrong way of cleaning the screen.
    Panasonic didn't want to repair it so I tried myself.
    The symptoms were vertical lines all over the screen.
    I cleaned all corrosion from the boards and now nothing is shown on the screen, including the menu (I can see that the monitor is turned on).
    What can I do next? Any recommendations?

    Thanks,
    Gil
    Tags: None
    • dick_barton
      Badcaps Legend
      • Aug 2015
      • 6642
      • Wales
      #2
      Re: Corrosion on Panasinic LED 55ET5

      Could you supply some photo's so that someone could help you.
      Willing to help but I'm no expert.

        Comment

        • vz56098
          Member
          • Feb 2015
          • 14
          • Israel
          #3
          Re: Corrosion on Panasinic LED 55ET5

          Photos of the screen or the boards?
          On the screen nothing is shown now (gray, but it looks like its turned on)
          The boards are clean now but before i cleaned i saw the corrosion on the components.

            Comment

            • dick_barton
              Badcaps Legend
              • Aug 2015
              • 6642
              • Wales
              #4
              Re: Corrosion on Panasinic LED 55ET5

              The boards please.
              Willing to help but I'm no expert.

                Comment

                • vz56098
                  Member
                  • Feb 2015
                  • 14
                  • Israel
                  #5
                  Re: Corrosion on Panasinic LED 55ET5

                  Ok, i will take some photos on Sunday as the TV is at my work now.
                  Meantime any suggestions until then are more than welcome.

                  Thanks a lot,
                  Gil

                    Comment

                    • dick_barton
                      Badcaps Legend
                      • Aug 2015
                      • 6642
                      • Wales
                      #6
                      Re: Corrosion on Panasinic LED 55ET5

                      It's extremely possible that the water has damaged the connections to the circuit board attached to the panel and may well be unrepairable. But without seeing the photo's I cannot be sure.
                      Willing to help but I'm no expert.

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • Ryan.man
                          Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
                          by Ryan.man
                          Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

                          My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

                          This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
                          02-04-2025, 12:23 PM
                        • kdaniel
                          Hitachi 58HK6100U - Horizontal Lines (Bottom third of the screen)
                          by kdaniel
                          As stated by the person I collected the TV from, it just stopped working overnight. However, I still gave it a go to try and repair it.

                          There is a thread on the same TV but with slightly different issues where they had to tape connection points on the ribbon cable, so I want to see if this is repairable by any chance.

                          After bringing it home and plugging it in, the TV turned on with its backlight working but had no picture. After removing the back cover, the first thing I tried is to unplug one of the ribbon cables and the situation is as follows.

                          Left...
                          11-16-2022, 09:23 AM
                        • smic717394
                          iphone XS turns off when press on screen.
                          by smic717394
                          Hi,

                          I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
                          07-25-2024, 10:16 AM
                        • dicky96
                          Laptop Screen top part working bottom part all white
                          by dicky96
                          Hi guys, I have an old laptop here I'm just trying to fix for the fun of it really

                          The top part, maybe 25% or 33% of the screen display works, (DOS boot text or bios screen, I have no HDD fitted) but the bottom part is all white.

                          On an external monitor connected to the VGA the picture is good.

                          So basically I have a horizontal division, below which the screen is all white. There is no apparent damage to the screen or any vertical lines

                          I tried cleaning the pins on the LVDS connector plug/socket as thy looked a bit dirty (18 pins plus...
                          07-20-2022, 08:58 AM
                        • Chrissygizmo
                          Samsung UE55JU6800K half screen dark
                          by Chrissygizmo
                          Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
                          I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same...
                          02-10-2025, 12:33 AM
                        • Loading...
                        • No more items.
                        Working...