Bottom half of tv is dim and flickers. Self diagnostics had TCom board as ng, replaced it but no luck. Seems to be a backlight issue. Is this the power supply or main board or backlight circuit. Any help appreciated.
Mo
If you look through the back panel can you see the backlight flickering ?
Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
Ok you need to take the lcd panel apart to the backlight then and get us some images.
Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
Yes. You need to disassemble the screen until you get to the LED strips. Be careful when you open the screen because is very fragile. If you break it, the game is over. There is no way how to fix a broken screen.
To clarify, when I turned down the brightness, the bottom half of the tv was just totally dark, almost not visible, but I did not notice if the lights were still blinking. If the LED are the problem, why do they flash and why would it be the whole bottom.
You said the Leds were flashing so it has to be them if thats the case ?
Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
Great question, on the samsung I usually select the brightest mode. Which one I turned down, heck, I wish I remembered. Have it completely apart right now so a little hard to check. You are thinking its the led's since they are flashing, so must be backlights?
So looking through the back cover you can actually see the Leds flickering ?
Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
Right now have it completely apart. Reconnected power board and Main board and the bottom half definitely flicker. I thought to test to see if its actually the led's was going to try the bottoms on top and the tops on the bottom. Any other suggestions since I do not have any testing equipment.
A little more detail top 3 rows light, middle 3 rows are dead, bottom 5 flash.
Middle ones need replacement? attached photos show connections and configuration
Well I think I got it. Two left and one right are out. I am having a dickens of a time finding replacement. Need two 2013SVS65F L11 and one 2013SVS65F R9. Any suggestions appreciated.
Comment