JVC LT 24c340. Panel / main boards queries

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Fleckers tv
    Fleckers TV
    • Nov 2015
    • 89
    • uk

    #1

    JVC LT 24c340. Panel / main boards queries

    As you may see in the pic , the Main cap went pop and took 2 diodes with it, replaced them but still dead.... My Wuestion is my screen model ends 03 but there are some boards available for screens ending 01, the rest of he numbers match fine, will it be ok to try an 01 ???
    Attached Files
  • dick_barton
    Badcaps Legend
    • Aug 2015
    • 6642
    • Wales

    #2
    Re: JVC LT 24c340. Panel / main boards queries

    I can't help there but did you check the mosfet under the heatsink alongside the large cap.
    Willing to help but I'm no expert.

    Comment

    • ReeceyBurger123
      Never Give Up !
      • May 2014
      • 7325
      • Britain

      #3
      Re: JVC LT 24c340. Panel / main boards queries

      Did you check the fuse ? Also what screen even is it for a start ?
      Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

      https://www.facebook.com/Telford-Tel...7894576335359/

      Comment

      • Fleckers tv
        Fleckers TV
        • Nov 2015
        • 89
        • uk

        #4
        Re: JVC LT 24c340. Panel / main boards queries

        for some reason the uploader does not allow me to upload 4 pics at once on an iphone even though it says it has, will try again

        Comment

        • Fleckers tv
          Fleckers TV
          • Nov 2015
          • 89
          • uk

          #5
          Re: JVC LT 24c340. Panel / main boards queries

          Here it is, if you mean plug fuse , yes , it had blown , if you mean board fuse, I'm not sure where that is , any help please on how to test anything else on this board is appreciated
          Attached Files
          Last edited by Fleckers tv; 04-16-2016, 12:52 PM.

          Comment

          • ReeceyBurger123
            Never Give Up !
            • May 2014
            • 7325
            • Britain

            #6
            Re: JVC LT 24c340. Panel / main boards queries

            Its a red ceramic type of fuse will screen shot it.
            Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

            https://www.facebook.com/Telford-Tel...7894576335359/

            Comment

            • ReeceyBurger123
              Never Give Up !
              • May 2014
              • 7325
              • Britain

              #7
              Re: JVC LT 24c340. Panel / main boards queries

              Here it is, the red can looking thing test for continuity across its two pins also test the black thermistor next to it looks blown to me.
              Attached Files
              Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

              https://www.facebook.com/Telford-Tel...7894576335359/

              Comment

              • Fleckers tv
                Fleckers TV
                • Nov 2015
                • 89
                • uk

                #8
                Re: JVC LT 24c340. Panel / main boards queries

                Thank you guys , I never thought was a fuse, I will test tomorrow and get back. I will be pleased as punch if it is ....

                Comment

                • ReeceyBurger123
                  Never Give Up !
                  • May 2014
                  • 7325
                  • Britain

                  #9
                  Re: JVC LT 24c340. Panel / main boards queries

                  Awesome, keep us updated buddy
                  Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

                  https://www.facebook.com/Telford-Tel...7894576335359/

                  Comment

                  • Fleckers tv
                    Fleckers TV
                    • Nov 2015
                    • 89
                    • uk

                    #10
                    Re: JVC LT 24c340. Panel / main boards queries

                    I found a fuse on a similar old board, and hey presto, so after a new Capacitor , 2 x2 amp diodes in the rectifier line and that fuse it's alive , thank you, I have learned more today, when I asked for help on this board to my colleague, he just scathed, these all in one boards are rubbish, throw it ..... Maybe true, but it's not the attitude is it,

                    Thanks again Badcap buddies

                    Comment

                    • Fleckers tv
                      Fleckers TV
                      • Nov 2015
                      • 89
                      • uk

                      #11
                      Re: JVC LT 24c340. Panel / main boards queries

                      Here it be alive. Apart from the DVD player that does not work, if you stick a disc in it just spits it out and the motor continues to run , which may have been the reason the machine popped in the first place, I have found a spare on eBay
                      Attached Files

                      Comment

                      • ReeceyBurger123
                        Never Give Up !
                        • May 2014
                        • 7325
                        • Britain

                        #12
                        Re: JVC LT 24c340. Panel / main boards queries

                        Awesome work mate
                        Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

                        https://www.facebook.com/Telford-Tel...7894576335359/

                        Comment

                        Related Topics

                        Collapse

                        • JSin21
                          Compatibility of main boards between different variations of samsung MU6100
                          by JSin21
                          Hoping someone here could possibly help. I have a few questions in regards to compatibility with main boards. But I'll give a quick short run down on what's going on first;

                          I have Samsung Smart TV UA65MU6100WXXY version DA01

                          Now years ago it started intermittently playing up after a lighting strike. Lighting hit the block of units i was living in at the time. Ever since that night the TV started having a mind of its own, It would randomly turn itself off or on, and all inputs stopped responding like HDMI, aerial, but USB still worked. Anyway, over the next few months...
                          11-27-2023, 04:54 AM
                        • advant
                          Driving a Sharp TCON/panel with a universal main board
                          by advant
                          This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

                          I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
                          02-03-2020, 12:25 AM
                        • ugamazing
                          Three 820-01700 32GB Logic Boards Same Issue: Won't Wake From Hibernate
                          by ugamazing
                          I have three identical-spec 820-01700 boards (2.6/32/512), and ALL THREE boards came to us with the same fault, from different sources: The boards don't wake from hibernation with the keyboard or lid, they ONLY wake when you press the power button. I understand this is a very minor issue, but the boards must be fixed!

                          We will of course begin with the obvious (checking lid signals), but I couldn't help but notice these three boards were all 32GB variants. Has anyone noticed an issue relating to these 32GB boards in particular? I of course don't think it's a RAM issue, but it's bizarre...
                          12-17-2024, 07:05 PM
                        • triplefour
                          SAMSUNG UN50TU8000F rebooting, backlight ok. No 12v to panel boards.
                          by triplefour
                          TV flashes backlight then reboots over and over. no image. Client said it used to have image for a bit before rebooting. Got worse over time.

                          tcon is built into mainboard.
                          Only one cable goes to panel boards.
                          there is a cable from one panel board to the other that links them.
                          cost cutting measure that results in us having harder time to diagnose.
                          removing the link to the second panel board allows TV to stay on with stable backlight but no image.
                          used cut off tape method to mask 1 maybe 2 pins on the side of the cable that goes to that second panel board....
                          07-28-2022, 07:59 PM
                        • AK_777
                          Sony KD-65A1 Repair – 4 Red Blinks Error
                          by AK_777
                          Hi everyone!
                          I have a Sony KD-65A1 TV with a fault – 4 red LED blinks. After disassembly and visual inspection, I found that the G76 power board and DKA board had been replaced. It is also possible that TCON was replaced, but I am not sure – there are a few marker marks that could be factory-made.

                          Based on assumptions, the previous service attempted to solve the issue by replacing potentially faulty components. I decided to investigate further, found a service manual, and figured out a way to power up the power supply unit autonomously and put the OLED panel and...
                          02-20-2025, 04:15 PM
                        • Loading...
                        • No more items.
                        Working...