PN64D7000 SAMSUNG - how to remove y buffer from y main

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • retro12345
    Member
    • Mar 2016
    • 13
    • USA
    #1

    PN64D7000 SAMSUNG - how to remove y buffer from y main

    Guys,
    How do you safely remove the y buffer from the y main board. For the life of me, I feel like I'm going to break the pins holding the boards together if I pull any harder. Thanks for the help,

    Retro
    Attached Files
    Tags: None
    • dick_barton
      Badcaps Legend
      • Aug 2015
      • 6642
      • Wales
      #2
      Re: PN64D7000 SAMSUNG - how to remove y buffer from y main

      Inching them out carefully a bit at a time at each end of the circuit board should do it. Not that I've done it but it is probably tight because of the number of connectors its attached to.
      Willing to help but I'm no expert.

        Comment

        • keeney123
          Lauren
          • Sep 2014
          • 2536
          • United States
          #3
          Re: PN64D7000 SAMSUNG - how to remove y buffer from y main

          Have you undone the caught-es on the connectors. the little clips on both sides of the bottom connectors that lock the connectors in?

            Comment

            • dick_barton
              Badcaps Legend
              • Aug 2015
              • 6642
              • Wales
              #4
              Re: PN64D7000 SAMSUNG - how to remove y buffer from y main

              Originally posted by keeney123
              Have you undone the caught-es on the connectors. the little clips on both sides of the bottom connectors that lock the connectors in?
              Good point.
              Willing to help but I'm no expert.

                Comment

                Previous template Next

                Related Topics

                Collapse
                • howardc64
                  A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
                  by howardc64
                  Problem

                  This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
                  08-04-2024, 10:36 PM
                • Document Archive
                  Samsung Galaxy Book 2 Notebook Specification for Upgrade or Repair
                  by Document Archive
                  This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
                  09-07-2024, 05:50 AM
                • Asraf Atb
                  Help Needed: Samsung UE55MU8000 Dead - Possible Main Board Issue
                  by Asraf Atb
                  Hi everyone,

                  Im looking for some advice regarding my Samsung UE55MU8000 TV with main board model BN94-11606C. The TV suddenly stopped turning on and now shows no signs of life at all not even the standby light at the bottom.

                  Initially, I suspected an issue with the PSU, so I took it to a repair center. They tested it and confirmed that the PSU works perfectly, even on other TVs. Based on that, I started investigating the main board.

                  I disconnected the main board from the PSU, and the backlight turned on, which seems to confirm the main board is the issue....
                  1 Photo
                  01-27-2025, 05:02 PM
                • JSin21
                  Compatibility of main boards between different variations of samsung MU6100
                  by JSin21
                  Hoping someone here could possibly help. I have a few questions in regards to compatibility with main boards. But I'll give a quick short run down on what's going on first;

                  I have Samsung Smart TV UA65MU6100WXXY version DA01

                  Now years ago it started intermittently playing up after a lighting strike. Lighting hit the block of units i was living in at the time. Ever since that night the TV started having a mind of its own, It would randomly turn itself off or on, and all inputs stopped responding like HDMI, aerial, but USB still worked. Anyway, over the next few months...
                  4 Photos
                  11-27-2023, 04:54 AM
                • elpatxi_bcn
                  Samsung HG75EJ690UB Hotel TV, change main?
                  by elpatxi_bcn
                  Hello!

                  I just got a Samsung TV model HG75EJ690UB 75" and 4K. It is a hotel TV, with a slightly different version of the Tizen operating system than the TVs at home.
                  Being a hotel, it is covered in many functions. With the service menu I can unlock some, but not others. For example, I can't install apps like Netflix etc...
                  The fact is that it seems that I can replace the main by a, say, "normal". I think the one that corresponds is NU7105, ref BN94-02635. At work, which is a convention center and a hotel, I have many TVs from 55" to 85" that...
                  05-19-2023, 03:21 AM
                • Loading...
                • No more items.
                Working...