Well, i have a thread where i seemed to have burnt the display out. Anybody know of a good source foe them? Particulary the plasma screen off a 60pk550. I think someone other than me wouldn't mind knowing whats out there.
-
-
Re: SOURCE for purchasing displays
There are probably company's who sell plasma and lcd screens but it's not worth it.
The plasma/lcd screen is the most expensive part of the whole tv! A new screen will cost the same if not more then a new tv.......
I wish those lcd screens were cheap. I would have been rich by now repairing all those smashed screens......
Sorry but chances you find a new cheap plasma screen are very very slim!!!I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!
-
Re: SOURCE for purchasing displays
A brand new lcd screen will cost like 600/700 euro. And when you find a company ...you need to buy them in bulk.
http://www.alibaba.com/product-detai...838.0.0.ziIy3mI only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!Comment
-
Re: SOURCE for purchasing displays
I have a 60pv250 screen not sure it's the same. It has a tear in one of the ribbons, which gives it a thin black line in the screen but it's better than nothing. Maybe.
If you want it for free it's yours but shipping is probably a lot.
There is a picture here https://www.badcaps.net/forum/showthread.php?t=52210Last edited by Malachi; 03-07-2016, 04:37 PM.Comment
-
Re: SOURCE for purchasing displays
Thanks for the gesture brother, but unless i can find another 60pk, im just gonna buy an 80in. Not sure ill do the 4k uhd tho. I dont really dig the 4d either. (I had managed to fix a 55in sammy with a simple well place screw and tightened it up.Comment
-
I am having some trouble with troubleshooting a Asus X532FL rev 2.0 motherboard, which does not power on. So at the first MOSFET, I am getting 19V at the drain, and then 3.2V on both gate and source (compared with ground). Of course, the 2nd MOSFET's source will have 3.2v at source.
First MOSFET is a QM3056M6 and 2nd MOSFET is a QM0930M3
I already checked first MOSFET and source and gate are not shorted (drain with source not shorted either). Also I have 1.7V at the LDO rail (measured at the keyboard connector, as the power button is on the keyboard).
First... -
Greetings to all, I hope you are well.
I consult you because I have a problem with this power source.
The TV when it is connected to the electrical power turns on the blue light but does not give an image. the source is heard a hum.
When I disconnect the power from the TV plates and power it up by itself, the hum goes away.
I have the STB voltages of 5vdc. The microcontroller is powered with said voltage and the main board LED lights up.
but not the 12v or 17v ones, nor the 300vdc high voltage voltages, nor the VS or VA....06-20-2023, 04:30 AM -
Hello, I have an Lenovo Thinkpad E590.
It displays the bios splash screen then displays the following error and turns off.
"BAD CRC of Security Settings in EFI variable"
&
Bad SVP Data, stop POST task.... -
Tonight I broke the battery connector on the motherboard of this laptop and need to source a replacement. See pictures. The marking seems to read B6u. The sticker on the motherboard reads TCZRFN6X00230 P03AJD BA92-20746B 06 29. If someone could suggest a proper part number and source, I would be very grateful.... -
Hello guys,
I have a shorted MOSFET K8A60DA with the following characteristics:
Type Designator: TK8A60DA
Marking Code: K8A60DA
Type of Transistor: MOSFET
Type of Control Channel: N -Channel
Maximum Power Dissipation (Pd): 45 W
Maximum Drain-Source Voltage |Vds|: 600 V
Maximum Gate-Source Voltage |Vgs|: 30 V
Maximum Gate-Threshold Voltage |Vgs(th)|: 4 V
Maximum Drain Current |Id|: 7.5 A
Maximum Junction Temperature (Tj): 150 °C
Total Gate Charge (Qg): 20 nC
Rise Time (tr): 25 nS
Drain-Source...
Comment