Philips 49PUK7100 4K UHD Picture Problem

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Diah
    Badcaps Legend
    • Feb 2013
    • 6598
    • Germany
    #1

    Philips 49PUK7100 4K UHD Picture Problem

    Hi,
    i found this TV on Ebay still not finished the betting, the owner wrote that there are no damage on LCD glass or the body of the TV. it make only this line in the middle see photo, well i never had UHD Panel before, either Android TV
    so my questions, is it Panel defect as i guess

    what do you think.

    Diah
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Tags: None
    • Neelix
      Senior Member
      • Oct 2013
      • 145
      • South Africa
      #2
      Re: Philips 49PUK7100 4K UHD Picture Problem

      I also think it's defect panel

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Patrick501
          Philips 55PUS6704 no picture, backlight ok
          by Patrick501
          Hello,
          I'd like to repair a Philips 55PUS6704.
          It turns on and you can see the backlight, hear the sound but no picture.

          When I disconnect one of the T-con cables, half of the screen turns white.
          right cable disconnected= right side white
          left cable disconnected= left side white

          When I tape like 6 or 7 pins of one cable it looks like the picture attached. I already tried another T-con board without success.
          There are no shorts on the the mainbaord and the two lcd panel boards...at leat I couldn't find any.
          Also you can notice one single...
          11-12-2025, 08:46 AM
        • courtcircuit
          Philips HTS8000 home cinema noise problem
          by courtcircuit
          Hello

          I have since a long time a Philips HTS8010S/01 which has been old but was doing the job.

          Since a few days, it starts by making a weird "static" nois when switches on for a few seconds to a minute and then works like a charm.
          Noise loudly outputs from the 3 channels, even if no signal is sent by the controler.DVD to the subwoofer/amp unit.

          I was thinking of a soldering that was starting to be damaged and that was only doing the job after a few seconds of heating, most probbaly on the power board
          Removed each of tyhe boards
          ...
          02-08-2025, 08:22 AM
        • charlesdutcher
          No picture issue in Philips Chassis FTL2.1
          by charlesdutcher
          Hello,
          My Plasma Philips 37inch chassis FTL2.1 does not show picture. It automatically goes into protection mode after 30 seconds (red led blinks at 3Hz)


          Is there someone having any symptom like this? How to fix it?

          Thanks in advance!​
          08-06-2024, 09:55 PM
        • doorzon
          AOC AGON AG273QCG refresh problem picture shifts
          by doorzon
          Hi all,

          hopefully someone on this board has an idea on how to begin with troubleshooting this problem.

          The monitor AOC AGON AG273QCG (curved 27" QHD monitor) has problems refreshing every 1 to 2 seconds or so. A line appears in the middle of the screen and the lower half of the screen is shifted to the right.

          See attached picture.

          I am leaning towards an issue with bad soldering of the graphics chip, because the problem used to go away after some time (minutes) but now it is here to stay.
          However, this could also be related...
          08-12-2023, 02:36 AM
        • bohaboha
          PHILIPS 32pfl3403d Flat-panel TV Upgrade Assistant problem
          by bohaboha
          Hi trying to update my Philips cause in retail mode not possible to get out from it i get this message in update site : Error message: no data exception. Your reference: Request ID (server_1930105)
          how to fix it thanks
          02-05-2025, 09:23 PM
        • Loading...
        • No more items.
        Working...