Panasonic TC-P46U1

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • martino
    Not so "senior"
    • Aug 2013
    • 997
    • canada
    #1

    Panasonic TC-P46U1

    Hello all,
    TV came in dead.7 blinks. Ysus board TNPA4829 AC was shorted.
    I replaced:Q401,Q421,Q422,Q661 and D685 to repair board.
    TV works great,it's test running atm.

    BUT,see pic#1,out of the 3 HDMI ports only port 3 works,menu had port 1 and 2 greyed out togetherer with component#2

    Question I have: Is this software related or did the HDMI chip fail,and how about the component#2?
    Attached Files
    Proud owner of dozens of broken TV's and many,many,many boards.


    Our website and passion:http://hollenhundshepherds.com/
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Andre Gilbert
      Panasonic TC-P55ST50 8 blinks then no blinks
      by Andre Gilbert
      Hello! yes I know there is already lots of information about this issue. I have a Panasonic TC-P55ST50 that originally displayed an 8-blink error code. Following the troubleshooting flowchart, I ended up replacing the SS board. However, even after replacing it, the issue persists. The TV turns on and stays on without displaying an image, and continuity is confirmed on all connectors. What am I missing here🤔?
      Ok Im a mechanical engineer ...but I thought I was able to follow a rather simple flowchart for electric troubleshooting 😂.

      TV Model: Panasonic TC-P55ST50
      ...
      1 Photo
      11-20-2024, 08:52 PM
    • AquaMan Ua
      Problem with PANASONIC CF53 laptop after changing BIOS settings
      by AquaMan Ua
      Hello. I am asking you for a hint on how to solve the problem with my touchbook Panasonic CF53-2 standart model. After setting up the BIOS, the laptop displays the wrong image until Windows loads. (More precisely, it displays, but distorted, instead of the Panasonic image immediately after turning it on, it displays what is in photo #1 in the attached file) Then the image appears when Windows starts loading and then there are no problems with the screen until the reboot. If you enter the BIOS, just a black screen. If you connect an external screen, the image on it is the same as on the built-in...
      2
      2 Photos
      05-17-2025, 09:40 AM
    • legg
      LG 42PC3 buffer output doesn't follow YSUS
      by legg
      LG42PC3D -UD originally with green lamp but no display or audio.
      Owner says was working, then went 'pop'.
      All 5V caps bulging. replaced.
      All PSU output voltages within spec but -Vy is low on YSUS.
      One of three parallel fets between SUS_OUT and SUS_DN is zenering,
      eventually shorts DG. Replaced all 3 - -Vy now OK.

      Y scan buffer test point does not follow YSUS output below -50V

      Note: This unit seems to expect YSUS output to park at -Vy in between
      drive signal pattern periods. A replacement drive signal board confirms this....
      11-18-2021, 11:49 AM
    • stecos
      Panasonic Plasma main board repair (ST30 GT30 VT30 ST50 GT50 VT50),LED with 3 blincks
      by stecos
      Hi everyone!
      I happened several times, in the search for help from the web, to consult this very interesting forum.
      So I decided to sign up and I intend to participate actively by making available my knowledge and experience on the subject, I'm a new user but at the same time I'm old in the sense that I have 4 decades of experience in repairing and designing electronics but above all I'm a great passionate about the subject.

      Having said that I come to the gist of my post on the forum as the title suggests.
      For my passion for technology I'm now collecting several...
      11-28-2022, 11:39 AM
    • aa10aa10
      Panasonic Toughbook CF-33 mk1 BIOS repair
      by aa10aa10
      Good day,

      I have tried to remove BIOS supervisor password from Panasonic Toughbook CF-33 mk1. Model number CF-33AENABTG, unfortunately I don't have any other info.

      I read the BIOS using afuwin, edited it and tried to flash new edited BIOS using afuwin. Unsuccessfully. Afuwin showed "Error: Problem erasing flash." starting with 0x00040000 and stoped. Then I tried many other options to flash BIOS from Windows without any luck. Finally i rebooted the device - and no post. Afterwards I have read the corrupted bios chip (MX25L12873F) using EZP2010 programmer....
      01-21-2025, 06:13 AM
    • Loading...
    • No more items.
    Working...