Sony Bravia Double image problem goes away after 15 mins

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • zeeshanonlyme
    New Member
    • Jan 2016
    • 2
    • India
    #1

    Sony Bravia Double image problem goes away after 15 mins

    Sony Bravia Ex330
    I'll get straight to it.
    In the morning when i turn it on, it shows double image where one is superimposed over the other and the distance bw the two images is ~5mm. One of the double image shows a slight discoloration. After 15 to 20 mins, everything goes back to normal and occasional the discoloration happens, (not the double image)

    Things I've tried
    1. Ruled out the set top box. It's a tv issue.
    2. Took apart the tv, tried to apply tape to the led ribbon cable. Tv refused to turn on. Red blinking light.

    What could be a possible solution /fault? Parts maybe?
    Tags: None
    • freakaftr8
      Badcaps Legend
      • Oct 2012
      • 3743
      • USA
      #2
      Re: Sony Bravia Double image problem goes away after 15 mins

      I would say two things are happening when you say the TV refuses to turn on do you have a blinking error code? And what did you touch between the period of the TV working and taking the back off the side of the LED driver cable in when you put tape on it what do you mean by putting tape on the cable. Maybe a few pictures would help better clarify what's going on. Take pictures of the power supply board and the main board
      Did I leave the soldering iron on?

        Comment

        Previous template Next

        Related Topics

        Collapse
        • howardc64
          TCL 49S405 double image
          by howardc64
          LCD displays a 2nd image slighty offset vertically. And multiple pairs of black lines along the bottom. Probably common as google "TCL 49S405 double image" pulls up this ifixit post ( link ) with identical ( nearly, but their fault seems to be on the other half of the panel than mine ) problem without solution.

          This one looks to be a more difficult to diagnose because most? of TCON seems integrated ( CSOT BGA on buffer baord) into the left panel edge board ( looking from rear of TV) There are 2 buffer boards for each 1/2 of the screen. Main connects to the left buffer board...
          06-23-2025, 03:20 PM
        • bubbajoey
          Sony Bravia KDL-65W850C red tinge and double image
          by bubbajoey
          Hi all,
          Long time lurker first time post.

          I was recently gifted a KDL-65W850C that had a faulty backlight LED, replaced the strip and it now has a functioning backlight.

          The issues now are that skin tones are red and also I'm getting double images
          and "ghosting"? on right hand side. I have attached pics.

          Also the "tab" on top right of panel is hot to the touch, when I do touch it does affect the picture slightly. The other tabs are cool to the touch. Pic also attached...finger in (pic because camera wouldn't focus)...
          03-25-2021, 11:56 PM
        • Cornito
          Samsung UE55RU8000 reboot and then double image after heating up
          by Cornito
          Hello team,

          I'm back with another tv and another problem.
          I try to improve my knowledge on fixing TV, and all technics used until now are not fixing correctly the problem.

          First, reboot issue, I use tape Method to find out the right side that cases the issue.
          Then using this it's working for quite 1hour30, then at some point of time the image became double on the bottom for half the screen.
          Then double image reduce in height and move to the top.
          The image is like folded on around 1cm and the bottom has been moved to the top by 1cm.
          When I...
          03-31-2024, 01:37 PM
        • PopsCaps
          Sony Bravia KDL-40V2500 that will not power on
          by PopsCaps
          I have a Sony Bravia KDL-40V2500 that will not power on. The indicator flashes red 3 times.
          I do not hear any sound and I cannot see any backlight.
          I have tried disconnecting every cable on each board one at a time to see if anything changes.
          The only change is when I disconnect AC-DET cable on the Power Supply board or on the other end if I unplug the CN7009 connection on the B-Board and try to power on the TV the indicator will stay on solid green until I power off.
          My friend ordered another used power supply board but it is also doing the red indicator flash 3 times...
          03-25-2025, 11:23 AM
        • justin35
          Sony bravia kdl-43w755c - boot loop
          by justin35
          Hello,
          i have this sony bravia kdl-43w755c which boot loops. After sony logo, it shows the android animation loading then it restarts…
          from what i read online it looks to be an emmc issue…
          i’m not familiar with this kind of tv repairs… i’m repairing laptops and gpu’s…
          i took out the board and say an samsung 16gb emmc
          i don’t have an exact replacement, but i have a few 32 and 64gb emms’s from laptops…
          i could try to put one instead of the 16gb one, but will it work?
          where do i get the software from?
          any help will be much appreciated!...
          03-06-2024, 12:26 PM
        • Loading...
        • No more items.
        Working...