Pioneer plasma TV

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • camrod
    New Member
    • Nov 2015
    • 3
    • surry
    #1

    Pioneer plasma TV

    My TV has went crazy.. I turn on the MAIN POWER and the light is red then the standby power light goes green for a second then back to red on the main power side. I get no picture at all. Cant get the TV to power up and stay on.
    Do you have a suggestion as to what has went wrong or what I can do to get it to power up?
    Tags: None
    • freakaftr8
      Badcaps Legend
      • Oct 2012
      • 3743
      • USA
      #2
      Re: Pioneer plasma TV

      First of all what is the model number of the TV?
      Did I leave the soldering iron on?

        Comment

        • camrod
          New Member
          • Nov 2015
          • 3
          • surry
          #3
          Re: Pioneer plasma TV

          model sd-643hd5

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Dani_2024
              Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
              by Dani_2024
              Hi and thanks in advance for any input you might provide!
              I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
              Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

              Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
              5 Photos
              10-28-2024, 05:06 PM
            • PantherDave
              Microsoft Surface Pro (5th gen) model 1796 - no power
              by PantherDave
              Hi all!

              I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅

              I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
              https://www.badcaps.net/forum/troubl...-hardware-devi...
              05-29-2024, 02:01 PM
            • GLISIT
              Asus Probook P5440UF-XB74 power issue
              by GLISIT
              Hi all,

              TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!


              I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!

              A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about...
              01-16-2025, 02:29 PM
            • mkdj
              Acer TravelMate P214 - N19Q7 main power rail shorted to ground
              by mkdj
              Dear all,

              I have taken out the motherboard of a Acer TravelMate P214. There is a short to ground on the main power rail (19V). I don't have the schematics or boardview for this board (DAZ8IMB1AA0 REVA). But I have found 4 MOSFETS close to the main power rail : 2 N-Channel and 2 P-Channel.

              I have checked resistance across each of the 4 MOSFETS. I have the following readings:
              Both N-Channel Mosfets: nothing odd

              P-Channel MOSFET number 1:
              source - drain : 117 kOhm
              source - gate: 96 Ohm
              gate - drain: 117 kOhm

              P-Channel MOSFET...
              08-20-2025, 06:08 AM
            • bcstedt
              Samsung PN50C540G3FXZA 50" Plasma, power cycling, Y-Main problem, Canada
              by bcstedt
              Just starting to crack into this one and wanted to get the ball rolling.

              At power on (plug in), power light on, relays click, repeat (sometimes)

              After disconnecting Y-Main from SMPS power stays on and boot up jingle is heard from speakers

              Removed Y-Main for inspection and testing

              This pic from:
              PN50C540G3FXZA Fast Track Troubleshooting Manual - Rev 1/10/12
              ...
              12-15-2023, 10:30 AM
            • Loading...
            • No more items.
            Working...