Re: Samsung UA60D8000 Cycling On/OFF
Thanks budm, I understand what you have explained. I really appreciate your help.
Thanks budm, I understand what you have explained. I really appreciate your help.
-
-
Re: Samsung UA60D8000 Cycling On/OFF
We are working on this tv (Samsung UA60D8000) currently, and noticed we couldn't force the backlight on. Since the power supply is just clicking we were trying to isolate the problem, and found even when we forced the back light the capacitors never really charged going to the leds. We replaced the FETs at Q9201. It worked perfect !!!Comment
-
Re: Samsung UA60D8000 Cycling On/OFF
Thanks stjeff0, the TV is not with me any longer but I assume the FETs are on the power supply board?, if so, I had replaced the power supply board and in my case it did not fix the issue.Comment
-
This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...09-07-2024, 05:50 AM
-
Hi everyone,
Im looking for some advice regarding my Samsung UE55MU8000 TV with main board model BN94-11606C. The TV suddenly stopped turning on and now shows no signs of life at all not even the standby light at the bottom.
Initially, I suspected an issue with the PSU, so I took it to a repair center. They tested it and confirmed that the PSU works perfectly, even on other TVs. Based on that, I started investigating the main board.
I disconnected the main board from the PSU, and the backlight turned on, which seems to confirm the main board is the issue.... -
Ok.. this is the story:
Have an old Samsung LED 3D TV (UE55F6475). First it started to lose light on the lower 40% of the screen now and then. Like for 10-60 mins and then it would work again. Then a bit later it just got stuck in that position. The lower 40% of the screen is dark, and it gets progressively darker the lower u go so it's obviously that LED strips where not working. I also looked for similar errors online and saw an exact copy and on that one it was faulty LED strips.
This is kinda how it looked, just that mine were at the bottom of the screen:
... -
Hoping someone here could possibly help. I have a few questions in regards to compatibility with main boards. But I'll give a quick short run down on what's going on first;
I have Samsung Smart TV UA65MU6100WXXY version DA01
Now years ago it started intermittently playing up after a lighting strike. Lighting hit the block of units i was living in at the time. Ever since that night the TV started having a mind of its own, It would randomly turn itself off or on, and all inputs stopped responding like HDMI, aerial, but USB still worked. Anyway, over the next few months... -
Hi, I did look everywhere to know if Samsung Y Main boards LJ92-01732A without rev marking is compatible with LJ92-01732A rev AA2.
If they are not compatible why did Samsung give them the same part number to begin with?08-04-2025, 11:35 PM
Comment