Lg 47ln5750 led tv

Collapse
X
Collapse
 
  • Page of 3
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 template Next
  • Agent24
    I see dead caps
    • Oct 2007
    • 4960
    • New Zealand
    #41
    Re: Lg 47ln5750 led tv

    I am not sure, I always keep them in the same order when I take them out to avoid that problem...

    http://nuigroup.com/forums/viewthread/14133 2nd image may help. It looks like that silvery\shiny looking sheet needs to go between the other two.
    Last edited by Agent24; 09-21-2015, 11:18 PM.
    "Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
    -David VanHorn

      Comment

      • tech2014
        Badcaps Veteran
        • Aug 2014
        • 807
        • Canada
        #42
        Re: Lg 47ln5750 led tv

        ok thanks Agent24

          Comment

          • johnboy1313
            Badcaps Legend
            • Nov 2012
            • 1959
            • USA
            #43
            Re: Lg 47ln5750 led tv

            I just picked one of these up today. I'm not sure what the fault is yet, but if I have to get into the panel, I'll let you know the order.

              Comment

              • gglgtv
                New Member
                • Feb 2016
                • 1
                • USA
                #44
                Re: Lg 47ln5750 led tv

                Were you able to repair your 47LN5750 TV. I have same model with same problem.

                  Comment

                  Previous 1 2 3 template Next

                  Related Topics

                  Collapse
                  • corrize
                    Where to find a very small fpc connector 0.3mm between 2 pins ?
                    by corrize
                    Hello, I search this connector (oxydated).
                    It's a fpc zif low profile connector. It come from camera sensor, it is very small : 0.3mm between 2 pins.
                    I ordered 2 from Aliexpress called « 0.3mm pitch » but one was 0.5mm between 2 pins and the other 0.6mm. In fact « 0.3mm pitch » seams to be the pad width and not the distance between 2 pins.
                    I can't find it. The other websites like mouser dont show the datasheet, and I can't check if it is 0.3mm between 2 pins ?

                    Do you know how to find this connector please ? What is the exact name for find it ?

                    ​...
                    08-06-2024, 05:25 PM
                  • Tynan Dill
                    Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                    by Tynan Dill
                    I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                    Upon bringing it home and plugging it up, it showed a standby light.

                    I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                    The screen seems to blackout and stay black, but with a flashlight I can see the display.

                    With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                    Assuming...
                    ORIGINAL POWER SUPPLY BOARD
                    7 Photos
                    11-22-2024, 01:46 PM
                  • bussincaps
                    MacBook Pro Mid-2014 A1398 Retina LED Controller Connector [First Repair (Disaster)]
                    by bussincaps
                    Hello All,

                    tl;dr: minimal electronics experience and my first repair, lifted 8 pads off the laptop display LED controller board when attempting a connector replacement, options are attempting pad repair or jump wiring.

                    Laptop Model: MacBook Pro 15 Mid-2014 Retina, A1398 MGXA2LL/A
                    eDP Display: Samsung LSN154YL01-A02, assembly sold as Apple part 661-8310
                    Soldering Equipment: Hakko FX-888D w/ T-18 tips (Chisel, Conical, Bevel types)

                    I needed to replace the 30-pin I-PEX Cabline connector (labeled J8300 in the Apple 820-3662 mainboard schematics),...
                    08-03-2023, 12:57 PM
                  • araxnido
                    Programming KBC IT8987VG ASUS TUF FX506L RT809F+PEB
                    by araxnido
                    Dear friends, I want to share my experience repairing an ASUS TUF FX506L gaming laptop motherboard: DABKXDMB8E0_F_BKXD. Boardview and schematic are available, as well as the BIOS and ITE ROM.

                    When the customer brought in this laptop, it was initially dead; it showed no signs of booting for any reason. After hours of measurements, checking each stage, MOSFET, and seeing if there was a short circuit in any capacitor, I discovered a strange 0.7V leakage voltage on the 3V_S5 rail, particularly on the PL9 coil, with the board not powered on. There were 3V_LDO and 5V_LDO voltages, which...
                    06-10-2025, 09:26 PM
                  • jagg
                    Hp pavillion x360 15-CR0087CL BOARD: LEIA_15 KBL UMA 17881-1B missing component
                    by jagg
                    Hello friends, I have this laptop which would not turn on, I detected that the 3v and 5v source circuits were damaged and a 6 pin circuit in short, which I suppose are diodes, I'm not sure since there is no diagram, I removed this circuit and the sources and there is no longer a short, the new 3v and 5v sources were installed and the laptop now works, the problem is that I don't know what this 6-pin circuit is, I think it has to do with the battery, since the operating system does not detect the battery, I measured the IC pins and they go to these pins of the battery connector, does anyone know...
                    04-23-2025, 12:48 PM
                  • Loading...
                  • No more items.
                  Working...